- Posts
- 8,982
- Location
- Solent
Guaranteed to happen within 5 minutes of draining it without spilling a drop
What is this "without spilling a drop" of which you speak?
Never managed it
Guaranteed to happen within 5 minutes of draining it without spilling a drop
It's what you do just before the container slips out of your hands, drop kicking it across the drive and sloshing up the front door! Then you run into the house to get kitchen roll, leaving permanent footprints in the carpetWhat is this "without spilling a drop" of which you speak?
Never managed it
It's what you do just before the container slips out of your hands, drop kicking it across the drive and sloshing up the front door! Then you run into the house to get kitchen roll, leaving permanent footprints in the carpet
Its the bit when you drop the drain plug into the bowl while carefully removing it, just before the jet of oil runs up yer overall sleeve. Not a drop spilled.What is this "without spilling a drop" of which you speak?
No usually do Planet Rock when in the shed.....most days the last few weeks.Am having a "repair shop" hour of contemplative regrinding of a pocket knife with a nasty nick in the blade. Radio playing quietly in the corner, the knife, the stones. Anybody else do small task meditation?
No usually do Planet Rock when in the shed.....most days the last few weeks.
You can cut mortice’s with a router and long bit.Bin lookerin ut mortice chisul er tachmints fer pilla dwills un mortice urs most ov terday. A fink it be easier ter av one fer maykin me dors. Av gorra pilla dwill anorl. Av got money but dunt oner spend it. Sort of fing yer buy un dun't use much.
Bin lookerin ut mortice chisul er tachmints fer pilla dwills un mortice urs most ov terday. A fink it be easier ter av one fer maykin me dors. Av gorra pilla dwill anorl. Av got money but dunt oner spend it. Sort of fing yer buy un dun't use much.
Yer but not but ah need em 75mm deep. Bin lookerin ut longa router bits ut 50mm long but they be fer arf inch. Mine be 1/4 so they dun't av much cut lenf int themd ervailabul. Probably need er few bits anorl assa lot ter do ter mayk free doors. Bin oot int ma gardin wotchin me buds un came tup wiv the eye dear ter buy the pilla dwill attachmint un bits. If it be no gud then by er mortisur un flog it when eye dun't need it afta er bit.You can cut mortice’s with a router and long bit.
No but they keep em sayf when they beer sheep int garrig.Wooding dors elps Ippos float?
Small Mortimer from multicoYer but not but ah need em 75mm deep. Bin lookerin ut longa router bits ut 50mm long but they be fer arf inch. Mine be 1/4 so they dun't av much cut lenf int themd ervailabul. Probably need er few bits anorl assa lot ter do ter mayk free doors. Bin oot int ma gardin wotchin me buds un came tup wiv the eye dear ter buy the pilla dwill attachmint un bits. If it be no gud then by er mortisur un flog it when eye dun't need it afta er bit.
small morticer like this would suit you then.Yer but not but ah need em 75mm deep. Bin lookerin ut longa router bits ut 50mm long but they be fer arf inch. Mine be 1/4 so they dun't av much cut lenf int themd ervailabul. Probably need er few bits anorl assa lot ter do ter mayk free doors. Bin oot int ma gardin wotchin me buds un came tup wiv the eye dear ter buy the pilla dwill attachmint un bits. If it be no gud then by er mortisur un flog it when eye dun't need it afta er bit.
Fanks. The multico ones dun't av any prices. Does yer have ter fone them ferra price?Small Mortimer from multico
small morticer like this would suit you then.
https://www.ebay.co.uk/itm/222637326012
Couldn’t find the multico one, only the larger commercial use ones.Fanks. The multico ones dun't av any prices. Does yer have ter fone them ferra price?
Av just reeleyesd eye int ad anyfink fer t. Nite.
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!