I thought it was too good to be true, suspension problems again

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
C

Colin from Hull

Active Member
Posts
299
Hi,
Just thought i would ask for help again, no faults showing on my software, all four suspension lights on, symbol for highest suspension (off road) on, and 35 mph max on, and suspension not working, ok last night, but not working this morning
 
Hi
Im going to manually raise my suspension with my compressor, does anybody know how may bar/bars for standard height
 
Colin from Hull said:
Hi
Im going to manually raise my suspension with my compressor, does anybody know how may bar/bars for standard height
Click to expand...
If it say's "slow 35 mph" there is a fault, if your software does not show the fault you have a communication problem, usually it's the USB to serial adaptor. If you are using the free EAS software, do you get a green "Good Idle"?
The pressure for the airsprings is 50/60psi to bring it up to standard height.
 
Hi
Sorry i didnt reply straight away, i was you enjoying my inflated suspension (Manually) But now back to try and sort it with my laptop/software and you guys i hope!!!!!!!!

So im in my car right now, to read the faults, i will let you know how i get on!
 
Hi
Coming up as (2. FR signal incorrect), i will spray terminal, but had this same problem awhile ago, so new sensor i reckon, which some of you thought that last time.....
 
Hi
Showing no faults, have good green idle, but when i switch off ignition, then back on, still showing 35 MAX, and No suspension
 
Forgive the silly question; but have you cleared the faults with the software??
After the dash faults come on can you then read the fault/s on your software??
 
Hi
I have good idle, i clear faults when i connect, then re-read faults and front righthand sensors comes up, i know righthand front sensor is suspect, but with my trolley jack can cure this so the faults disappears!
I will follow your instuctions tonight.
I have tested compressor, and it does run, but doesnt run when engine is running, would any faults show if the compressor or valve blocks was at fault?
 
Colin from Hull said:
Hi
I have good idle, i clear faults when i connect, then re-read faults and front righthand sensors comes up, i know righthand front sensor is suspect, but with my trolley jack can cure this so the faults disappears!
I will follow your instuctions tonight.
I have tested compressor, and it does run, but doesnt run when engine is running, would any faults show if the compressor or valve blocks was at fault?
Click to expand...

No faults if compressor is duff no fault is thermo switch is duff.. Valve block has no effect on compressor running apart from pressure switch. Change the sensor.
 
Colin from Hull said:
Hi
I have good idle, i clear faults when i connect, then re-read faults and front righthand sensors comes up, i know righthand front sensor is suspect, but with my trolley jack can cure this so the faults disappears!
I will follow your instuctions tonight.
I have tested compressor, and it does run, but doesnt run when engine is running, would any faults show if the compressor or valve blocks was at fault?
Click to expand...
That just proves that the sensor track is worn at normal height.
 
You must log in or register to reply here.

Similar threads

Stev
suspension in extended mode and Suspension failure
2 3 4
Replies
68
Views
6K
Stev
Stev
Lackingsense
Sport Air suspension/HDC fault
Replies
14
Views
3K
Lackingsense
Lackingsense
A
Air suspension problems
2
Replies
30
Views
3K
Alec1943
A
D
L320 suspension query
Replies
6
Views
429
Graculus
Graculus
S
Suspension Nightmare Unsolved!
Replies
4
Views
987
sierrafery
sierrafery
Back
Top