I think I have odd hubs

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
LordOWar

LordOWar

Well-Known Member
Posts
460
Location
North West
I was just in the garage cleaning and painting front axle parts and I noticed that the hubs are a bit different. One looks like I would expect with the thin machined ring around the hole for the oil seal on the other one that machined bit is much bigger. I think I may have an early and post 1980 hub but not sure. Do I get another, mainly because my ocd is going because they are different lol, pics below..Thanks You should have seen the bearings in the swivels WOW talk about worn

what I was expecting.jpg



what I have.jpg
 
Already done the rear and I have 2 of the little lip on the back. I've ordered a replacement for the odd unpainted one. Probably turn out the axle is a later one and the funny hub is correct one. That is usually how it goes.
 
tottot said:
The small lip one is right for late 2a and then 3 up to 1980. I think your odd is from a post 80 Rangy,
Click to expand...
Thats what I was suspecting, Ive ordered a replacement if for no other reason than it brings on a raging case of OCD. IT doesnt match, it doesnt match arrrgh.:eek:
 
I don't really pay attention to them when I took them out but they are still in the garage so I will check them.
 
You must log in or register to reply here.

Similar threads

G
Defender 110 brake callipers
Replies
5
Views
514
Groaning Hippo
G
JIMBOB LR
Less Is More. The LR Series lives on.
2 3
Replies
44
Views
4K
JIMBOB LR
JIMBOB LR
B
Series 3 How Does the Grease / oil stay in the Hub
Replies
17
Views
3K
tottot
tottot
DefendingLancashire
300TDI Four-parter: brake wear, lift pump / fuel filter, turbo, and bushes / squeaking
Replies
13
Views
493
miktdish
miktdish
xDParis64
Right...
Replies
9
Views
1K
pwood999
pwood999
Back
Top