slob
Well-Known Member
- Posts
- 22,488
- Location
- Harrogate or London
go on then ........wurs yer proof
I am thinking of going topless!!
- Thread starter porkflap
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
GRUNT
Well-Known Member
- Posts
- 8,911
- Location
- On the lake Geneva shoreline.
Here on me bookshelf.
davidc1075
New Member
- Posts
- 3
If you log onto this site The D-90 Source click custom mods which is near the top of the screen then when this page loads on the left click station wagon to soft top conversion. Loads of pictures well worth a look if you thinking of doing it. It will take 2 hrs to get the top off but you'll need about three people for the lift with the old top. If you need any other help let me know Dave
porkflap
New Member
- Posts
- 75
- Location
- derbyshire
that's great thanks for the pm I an going to get the kit for the job around easter when its a bit warmer! Gives me lots or time to look at the pics on f
that site tempted to paint it first (g4 orange) with black arches etc
that site tempted to paint it first (g4 orange) with black arches etc
busaboy
New Member
- Posts
- 312
- Location
- Warwickshire
Think i might have to do mine too, but will have a roll bar made to fit inside just in case the worst happens.
davidc1075
New Member
- Posts
- 3
You can get an ex army roll bar that fits under the ragtop
porkflap
New Member
- Posts
- 75
- Location
- derbyshire
Hi,
Was thinking of roll bars as well but not sure exactly which direction to go,... full external outside the tilt, just something round the window or somthing behind the drivers/passengers head.
Is there anywhere that sell kit for a good price ready to fit or is it that oppatunity to learn to weld i have always thourght about!
Was thinking of roll bars as well but not sure exactly which direction to go,... full external outside the tilt, just something round the window or somthing behind the drivers/passengers head.
Is there anywhere that sell kit for a good price ready to fit or is it that oppatunity to learn to weld i have always thourght about!
porkflap
New Member
- Posts
- 75
- Location
- derbyshire
well i have gone for it! and puchased the kit!, now to think about back doors and roll bars
porkflap
New Member
- Posts
- 75
- Location
- derbyshire
thanks i will take a look at it!
