Disco 2 how to remove rear radius arms easily

Beneagles · Jul 25, 2023

Kaijun said:
I got rear bolt out, but front one is at trick position, also blocked by something on axle, need a bit more room View attachment 293624

Would it fit from the other side? If so cut the old one in half and use a new bolt to refit.

Kaijun · Jul 25, 2023

meego said:
Mate. That rear drop link bracket is welded to the axle. So that bolt must come out !! How else would they have got it in
And your wheels are still on the ground ?? Not that dropping your axle will help in this instance.

Other three wheels are on the ground. I managed to slide out. I tested it again, I have to manoeuvre it in that bucket. The bushes on axle are still in good condition, mot guy pointed to me the bush on chassis is bad, not only this one, but another rear one and a front one.

meego · Jul 25, 2023

Kaijun said:
Other three wheels are on the ground. I managed to slide out. I tested it again, I have to manoeuvre it in that bucket. The bushes on axle are still in good condition, mot guy pointed to me the bush on chassis is bad, not only this one, but another rear one and a front one.View attachment 293636 View attachment 293637

Good, it’s out. Now the fun begins getting the bushes out

Disco 2 how to remove rear radius arms easily

Beneagles

Well-Known Member

Kaijun

Active Member

meego

Well-Known Member

Similar threads