RangeRoller dt
Well-Sprung Member
- Posts
- 14,393
- Location
- Trapped inside my head @ LZ asylum
Where dya put your spare wheel n Jack n stuff?
Henry_b's Range Rover P38 Project'ish
- Thread starter Henry_b
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 9,105
- Location
- Roaming the UK on assignments
I think he keeps Jack in the blanket box at the bottom of his bed with either the gimp suit on or just a ball gag and mankini, but it depends on the weather
Henry_b
Think outside, no box required.
- Posts
- 15,506
- Location
- somewhere else
The Jack etc isn't displaced.
The spare wheel goes in a "wheel bag" as to not damage the carpet and placed in the boot
- Posts
- 9,105
- Location
- Roaming the UK on assignments
Being a 2001 She is on Thor management
Runs/ran very well on LPG
Range was pretty good too.
You not gonna jolt it for spark? I think Lloyds are offering something more plug an play than MJ/MS?
https://www.lloydspecialistdevelopm...rammable-engine-management-kit-thor-rover-v8/
RangeRoller dt
Well-Sprung Member
- Posts
- 14,393
- Location
- Trapped inside my head @ LZ asylum
Every Landy I’ve had has the plastic boot liner. Worth it’s weight in gold as I use these vehicles for hard labour and all sorts end up in there. Pain putting long things in P38 though as both rear seats need to be folded for tray not be in way.
Henry_b
Think outside, no box required.
- Posts
- 15,506
- Location
- somewhere else
That looks like an interesting kit to add, would add some flexability, the duel fuel mapping looks cool
I've also been toying with Supercharging her
Much like the JE engineering S500
350hp and over 500nm of torque, bet that would be fun!!
Engine will need going through, 'twas doing that anyway ehh..
That LLoyd kit would pay dividends in this case
- Posts
- 9,105
- Location
- Roaming the UK on assignments
That looks like an interesting kit to add, would add some flexability, the duel fuel mapping looks cool
I've also been toying with Supercharging her
Much like the JE engineering S500
350hp and over 500nm of torque, bet that would be fun!!
Engine will need going through, 'twas doing that anyway ehh..
That LLoyd kit would pay dividends in this case
The whine of a supercharger is awesome
Henry_b
Think outside, no box required.
- Posts
- 15,506
- Location
- somewhere else
It does sound good..The whine of a supercharger is awesome
Would be fun to have a 4.6 thats chewing on the heels of a 630r or even a supercharged L322
Henry_b
Think outside, no box required.
- Posts
- 15,506
- Location
- somewhere else
'Twas given some Autoglym Bumper Gel to try out..
Not bad stuff.
Thanks TM factors LOL.
Not bad stuff.
Thanks TM factors LOL.
Henry_b
Think outside, no box required.
- Posts
- 15,506
- Location
- somewhere else
Hmm still like my Blue One
RangeRoller dt
Well-Sprung Member
- Posts
- 14,393
- Location
- Trapped inside my head @ LZ asylum
If you get chance I’d grab one if cheap. it’s carried everything from old silage wraps, rubble, furniture, tools, oil. ‘95 and carpet underneath is still like new. Usually in rearmost position with no gap
Henry_b
Think outside, no box required.
- Posts
- 15,506
- Location
- somewhere else
Just Kurusted a small spot of Surface rust on my chassis..
Yep..
Terminal
Henry_b
Think outside, no box required.
- Posts
- 15,506
- Location
- somewhere else
Nope don't need a welder yetDon’t rush out to buy a welder yet mate,
J
- Posts
- 9,105
- Location
- Roaming the UK on assignments
So when you putting some manly tyres on there in stead of them sissy slicks
Just Kurusted a small spot of Surface rust on my chassis..
Yep..
Terminal
Thought P38s were rust free
Henry_b
Think outside, no box required.
- Posts
- 15,506
- Location
- somewhere else
So when you putting some manly tyres on there in stead of them sissy slicks
Thought P38s were rust free
Some BFG AT2's will be going on in due course.
As for rust thats all she has
Henry_b
Think outside, no box required.
- Posts
- 15,506
- Location
- somewhere else
Just lobbed a 2nd coat of Kurust on and then a coat of Zinc primer.
Primer.
Also some under chassis and "frame" work..
Rear Axle also got a coat of converter..
Needs a 2nd coat..
And then hammerite waxoyl and then underseal.
Primer.
Also some under chassis and "frame" work..
Rear Axle also got a coat of converter..
Needs a 2nd coat..
And then hammerite waxoyl and then underseal.
RangeRoller dt
Well-Sprung Member
- Posts
- 14,393
- Location
- Trapped inside my head @ LZ asylum
Looks good, is in good nick.
If you take the plastic liner out there is usually some rust around the edge leading to the door. You got in around back pipes over chassis well
If you take the plastic liner out there is usually some rust around the edge leading to the door. You got in around back pipes over chassis well
Henry_b
Think outside, no box required.
- Posts
- 15,506
- Location
- somewhere else
A good coat of underseal on the chassis.
I have had to remove the jack stands so she is now sat on her axles...
Also applied a coat of Gtech Ceramic glaze stuff.
I'm odd, yes.. lol
I have had to remove the jack stands so she is now sat on her axles...
Also applied a coat of Gtech Ceramic glaze stuff.
I'm odd, yes.. lol
- Posts
- 9,105
- Location
- Roaming the UK on assignments
A good coat of underseal on the chassis.
I have had to remove the jack stands so she is now sat on her axles...
Also applied a coat of Gtech Ceramic glaze stuff.
I'm odd, yes.. lol
You wanna watch that rust on there, looks terminal from here
Similar threads
