Help me identify this plug pleesee

Ratae said:

"You must inspect any ABS systems fitted.

When testing ABS equipped vehicles, the road wheels that are lifted off the ground should not be allowed to rotate when the ignition is on. This can cause the ABS system to indicate a fault which may require specialist equipment to rectify.

If the ABS has been intentionally rendered inoperative, the whole system must be removed. This does not apply to sensor rings or other ABS components which are an integral part of another component, such as a brake disc or drive shaft.

It’s not permissible to remove or disable the ABS from a vehicle first used on or after 1 January 2010. Not all vehicles first used on or after 1 January 2010 will have ABS, so the failure only applies where the system has obviously been removed."
www.gov.uk/guidance/mot-inspection-manual-for-private-passenger-and-light-commercial-vehicles/1-brakes Section 1.6

Click to expand...

Ratae said:

BUT
If the vehicle was factory fitted with ABS then that will likely be on its original build sheet. Removal would be a modification which I would think would need to be declared to your prospective insurers.
Whether they would choose to insure at the same rate as an unmodified car, a higher cost or not at all is something only they could answer.

Click to expand...

Sebrof said:

This is true, most insurers seem to frown upon DIY mechanics messing around with the braking system, strangely enough I cant think why? Anyway I was just thinking of the easier option, might well work out cheaper to fix the system.

Click to expand...

Stanleysteamer said:

But he'd have to really know what he is doing.

Click to expand...

Stanleysteamer said:

You could always ring them and get quotes. Or ring your existing insurer and ask then what the cost would be if you did it. If it would be more than the cost of a repair then no brainer.
Many 4x4s of that era didn't have ABS, my 300tdi Disco 1 for instance, which dates from 1998. So I doubt it'll be a big problem. Do some digging you may well find the lower level RRs from that year didn't have it anyway.

Click to expand...

oakey said:

Agreed and its under the passenger seat and car is on coils so that makes me think EAS sensors

Click to expand...

Ratae said:

AIUI from the first post the plug wasn't plugged in to anything, which begs the question of - if it is for the abs - how the abs is working?

Click to expand...