Hazard relay 300tdi
- Thread starter rob1066
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Hicap phill
Well-Known Member
- Posts
- 16,238
- Location
- Wiltshire
When the hazards are on the dash thinks there is a trailer connected so flashes the trailer light instead.
Normally that light flashes once during normal usage of an indicator(at the start)
I disconnected the trailer wiring from the wiring loom has I thought that may have been the initial problem wear should I start looking now thanks
Hicap phill
Well-Known Member
- Posts
- 16,238
- Location
- Wiltshire
You have replaced the indicator relay??(with another correct indicator relay)
Yellow are normal relays on a landy.
Hicap phill
Well-Known Member
- Posts
- 16,238
- Location
- Wiltshire
And have you replaced the hazard switch?
Yes fitted new hazard switch, with the small yellow one nothing happened the black bigger 4pin works ok but as I say it just flashes the trailer light on the dash when the hazard switch is operated and not indecator arrows
Hicap phill
Well-Known Member
- Posts
- 16,238
- Location
- Wiltshire
When you indicate do the arrows flash individually?
Yes all OK on stick just the switch
Hicap phill
Well-Known Member
- Posts
- 16,238
- Location
- Wiltshire
As mentioned before. The trailer light symbol will flash when hazards are used. This is due to 3 or more 21watt bulbs flash. Relay thinks there is a trailer attached and flashes.
This is normal for all landrovers. Even removing trailer wiring the dash will flash
OK thanks
mystery
Well-Known Member
- Posts
- 1,510
- Location
- BULKINGTON
