- Posts
- 83,282
- Location
- Embasinga stocæ
inclinometer 
?
?
Freelander Mods
- Thread starter Mrfulwell
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
juiceyv8
New Member
- Posts
- 4,738
- Location
- bordon hants
They are only the right way up once they have rolled over.....
Good effort on the REME capbadge
Good effort on the REME capbadge
Mrfulwell
New Member
- Posts
- 232
- Location
- The Terrodome, Suffolk
I like your ariel mount on the spare wheel seen similar ones on eBay, I think I'm going to have a crack at making one on my day off. Nice looking car you got.
- Posts
- 83,282
- Location
- Embasinga stocæ
looks a bit taller than them - is it home made?
Nah its the one of fleabay. Much better than the one I made earlier!!! Could do with a little "finishing" like rounding of the corners of the ground plate but thats just being fussy!! Easy to run the cable through door and to the front too.
Mrfulwell
New Member
- Posts
- 232
- Location
- The Terrodome, Suffolk
Do you get a good earth from it?
Yes you do, it comes primed but just get a dremmel on it and grind the primer off where the earth ring goes and excellent reception. Im in Cardiff and can sometimes pick up Bridgwater/Western Supermare etc Ive never had a problem with it
Mrfulwell
New Member
- Posts
- 232
- Location
- The Terrodome, Suffolk
So had a bit of free time so I figured I would have a crack at fitting the nudge bar I got off eBay, I will be honest it was a right pain in the arse, had to remove the front bumper, make up some brackets from some old steel i had lying around, drill holes in the front bar to mount them, re position the number plate as it did not sit right but got there in the end, now I have to take it all apart and get the nudge bar painted.
A shot of the brackets,
And the nudge bar in position
A shot of the brackets,
And the nudge bar in position
Mrfulwell
New Member
- Posts
- 232
- Location
- The Terrodome, Suffolk
Oh and forgot to add mounted a little bracket for the cb mic to sit in, ordered some seat covers from eBay (DPM pattern) will post pics when they arrive.
JonFre
Active Member
- Posts
- 557
Mrfulwell
New Member
- Posts
- 232
- Location
- The Terrodome, Suffolk
Thank you, there is plenty more to come!
Mrfulwell
New Member
- Posts
- 232
- Location
- The Terrodome, Suffolk
Sanded down the old nudgebar this morning and gave it it's first coat of paint, think i will need around 2-3 coats for a nice finish. Looks a million times better with just one coat.
freelander2002
Active Member
- Posts
- 354
- Location
- Cheshire, UK
Looking good
purplelandy
New Member
- Posts
- 9
- Location
- Hereford
Looks good, matching rock slides would look good
- Posts
- 83,282
- Location
- Embasinga stocæ
yu gorra have one of these....
Mrfulwell
New Member
- Posts
- 232
- Location
- The Terrodome, Suffolk
Errrrr maby not.......
Streetlander
Active Member
- Posts
- 227
- Location
- Sydney, Australia
Mrfulwell
New Member
- Posts
- 232
- Location
- The Terrodome, Suffolk
Had some bits arrive in the post today, seat covers from eBay, very happy with the quality and they fit well.....
And the cb ariel mount also from eBay, again very happy with the quality, and sits high enough that it won't catch when I switch the tyres to bf goodrich.
And a nice little sticker for the rear window...
The antenna for the cb should arrive tomorrow so will update then.
And the cb ariel mount also from eBay, again very happy with the quality, and sits high enough that it won't catch when I switch the tyres to bf goodrich.
And a nice little sticker for the rear window...
The antenna for the cb should arrive tomorrow so will update then.
Last edited:
Mrfulwell
New Member
- Posts
- 232
- Location
- The Terrodome, Suffolk
Cv antenna arrived today, will be running the cable at the weekend but could not resist bolting it on, she's looking well!
Cv antenna arrived today, will be running the cable at the weekend but could not resist bolting it on, she's looking well!
I like that mate, BUT you STILL have them ****ing spot lights fitted! Get some square ones!
