- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Excellent!
Flex plate question...
- Thread starter Littelwill
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Littelwill
Well-Known Member
- Posts
- 3,065
- Location
- Lincolnshire
Went out tonight still nothing so fingers crossed...
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Well done. Followed your instincts against several people's opinions.
Damn weird that the noise appeared to come from the transfer box. Weirder still it did it in all positions apart from neutral. Who'd have put that mystery together? A learning lesson there: if it sounds like the transfer box but doesn't do it in neutral then the problem could be upstream!
Damn weird that the noise appeared to come from the transfer box. Weirder still it did it in all positions apart from neutral. Who'd have put that mystery together? A learning lesson there: if it sounds like the transfer box but doesn't do it in neutral then the problem could be upstream!
Littelwill
Well-Known Member
- Posts
- 3,065
- Location
- Lincolnshire
I know. But thanks for everyone's help and opinions. I'm thinking that the noise must of traveled down the gear box and the transfer box was the last in the line so it came from there...?
sassanach
Well-Known Member
- Posts
- 1,496
- Location
- trowbridge wiltshire
so what state is the flex plate in?
Datatek
Well-Known Member
- Posts
- 44,883
- Location
- Near Poitiers SW France
Pleased to hear your gamble paid off.
Littelwill
Well-Known Member
- Posts
- 3,065
- Location
- Lincolnshire
The plates worn and one of the bolts wasn't very tight at all. It was also very slightly bent.
