exhaust removal ?

gazza1591 · Feb 14, 2015

Hi All

Looking to take of my rear box tomorrow and replace with a side exit one,so i need to get it apart at the centre box, i have been under it today and gave the bolt clamps a spray up so hopefully they wont be to bad but any one got any advice on best way to split back box and centre box ? i dont have any ramps handy so not a great deal of room but want to give it go if i can ?

channi · Feb 14, 2015

2 or 3 section,the 3 section one comes apart 'n' easy to get out from the back end and thats with no jacks or ramps but it would be even Easyer the higher you can get the back end

woody13 · Feb 14, 2015

Mine came apart fairly easy and but it did help having a 2" suspension lift.

gazza1591 · Feb 14, 2015

Not sure if it's 2 or 3 section one, it's on a 300tdi. I hope it won't be to rusted in place

woody13 · Feb 14, 2015

Its a 3 piece system.

discool · Feb 14, 2015

woody13 said:
Its a 3 piece system.

How do u know that?.
When the D1 left the factory the system was one piece from the down pipe backwards.

Dippypud · Feb 14, 2015

Reciprocating saw will fix that for you ...

woody13 · Feb 14, 2015

discool said:
How do u know that?.
When the D1 left the factory the system was one piece from the down pipe backwards.

Cos I fitted one last month and the old one is still in the garage.

channi · Feb 14, 2015

The hardest part is threading it over the rear end

discool · Feb 14, 2015

channi said:
The hardest part is threading it over the rear end

Not hard at all if u enter it over the axel up side down and then twist it as u do it

discool · Feb 14, 2015

woody13 said:
Cos I fitted one last month and the old one is still in the garage.

Not original then.

discool · Feb 14, 2015

Dippypud said:
Reciprocating saw will fix that for you ...

That's a luxury

For me a mini hacksaw an a packet of blades.

channi · Feb 14, 2015

discool said:
Not hard at all if u enter it over the axel up side down and then twist it as u do it

I know, just saying that's the hardest bit

Dippypud · Feb 14, 2015

discool said:
That's a luxury For me a mini hacksaw an a packet of blades.

Normal hacksaw, greasy rag round one end of blade ...

Dippypud · Feb 14, 2015

channi said:
I know, just saying that's the hardest bit

Jack up the vehicle and support the body on stands, letting the axles hang ...

should give you just enough room ...

woody13 · Feb 14, 2015

discool said:
Not original then.

Don't ask me,this is my first Land Rover and I've only had it five months.

exhaust removal ?

gazza1591

Active Member

channi

Active Member

woody13

Active Member

gazza1591

Active Member

woody13

Active Member

discool

Well-Known Member

Dippypud

Never Knowingly Understood

woody13

Active Member

channi

Active Member

discool

Well-Known Member

discool

Well-Known Member

discool

Well-Known Member

channi

Active Member

Dippypud

Never Knowingly Understood

Dippypud

Never Knowingly Understood

woody13

Active Member

Similar threads