EKA no go

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Thanks for the replies - much appreciated.



Done this - fob light does not flash when key is turned to position 1.



Bonnet is, I think, sorted. I've had the latch and switch out, and tested the switch - circuit is closed when the button on the switch is not pressed, and open when it is pressed. In other words, just connecting the switch to the multiplug closes the circuit. So, I tried with the switch connected (but not in the latch). I also tried with the pins on the multiplug bridged to close the circuit manually. Neither worked. Greased the latch and reassembled - still no joy. Is there any other way to tell if the switch is registering open or closed?

A multimeter set on continuity
 
Done this - fob light does not flash when key is turned to position 1.

You don't have passive then or it's not working .
 
Back
Top