EAS The Battle Continues

PPP38vouge said:

Always leave mine at normal height unless unloading the weekly shop, light flashes for no more than 10 seconds when pulling of the drive then she is back up to normal height. give it a try Rachel, leave the car at normal height overnight then time how long it takes for the height lights to stop flashing on next start up ? think you will find it will not take long.

Click to expand...

Rachelkgr said:

I have locked mine at normal height. Interestingly, when I park up, I can hear the valves click away and she drops down. Lifts straight up when I drive off. Pump hardly running now.

Click to expand...

PPP38vouge said:

Hi Rachel, one more thing you can do to keep the EAS happy is to vent the EAS box where your valve block and pump sit. The driver pack in particular does not like heat, if it gets too hot they tend to play up a bit. I have ran my car with the lid off and then with the lid on and must say it is much more stable when running with the lid off cos of a lot less heat, a lot off members on this forum have done the mod and have noticed a difference, even Datatek has done it so it must be worth while. If you do a search ther are a few threads on the subject. Most members drill holes in the lid and some have even fitted little fans into the lid.

Click to expand...

Rachelkgr said:

Ooooooo, I like that Idea! Thanks!

Click to expand...

Datatek said:

Forget the fans Rachel, I can send you a pic of where to drill holes to minimise the risk of water etc getting in.

Click to expand...

Rachelkgr said:

Thanks, Keith, that would be brill!

Click to expand...

Datatek said:

PM me an email address to send pics to.

Click to expand...