nikb2008
New Member
- Posts
- 26
Hi all
not been on here in a while as my rangey has been behaving for a change.
it's that eas problem time of year now, it's been struggling for a while so i decided to install some manual valves to inflate the system myself which will give me time to strip the other parts and service them as needed, when i get time.
i fitted the valves today and only seem to get two of them to inflate, i checked the valves themselves which are working fine.
my question is, does anyone know where there is a picture of the valveblock indicating which pipe does what ? the instructions i followed gave colour coding on all the different pipes, however, only two of mine were colour coded. so i guessed at the four pipes which are grouped together and fitted the valves.
if i can see it on a picture then i can double check i have fitted them right.
also i was under the impression the system ran at about 150psi, my local forecourt air supply only goes up to 60 !!
is it really 150 psi i need ? and how do i get that , could i get a little compressor to pump up to that level ?
any help much appreciated
thanks in advance
nik
not been on here in a while as my rangey has been behaving for a change.
it's that eas problem time of year now, it's been struggling for a while so i decided to install some manual valves to inflate the system myself which will give me time to strip the other parts and service them as needed, when i get time.
i fitted the valves today and only seem to get two of them to inflate, i checked the valves themselves which are working fine.
my question is, does anyone know where there is a picture of the valveblock indicating which pipe does what ? the instructions i followed gave colour coding on all the different pipes, however, only two of mine were colour coded. so i guessed at the four pipes which are grouped together and fitted the valves.
if i can see it on a picture then i can double check i have fitted them right.
also i was under the impression the system ran at about 150psi, my local forecourt air supply only goes up to 60 !!
is it really 150 psi i need ? and how do i get that , could i get a little compressor to pump up to that level ?
any help much appreciated
thanks in advance
nik