tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Titled Emergency Ward 10.All the above is in a thread of mine somewhere
Titled Emergency Ward 10.All the above is in a thread of mine somewhere
Crikey used to watch that as a kidTitled Emergency Ward 10.
Richard Chamberlain,cause a few damp patches from all accounts.Crikey used to watch that as a kid
Naw he was Dr Kildare as stated Remember my mum and her pals always watched itRichard Chamberlain,cause a few damp patches from all accounts.
Oh yup, the memory isn't as good as I thought,. I thinkDr Kildare?
Nanocom is worth its weight in gold for a P38 owner. Though for EAS systems you can download the free RSW software and buy a cable to talk to the car.thank you, I will have a proper look over the weekend. Do you think it is worthwhile buying a nanocom for the P38? I would like to keep it for a while, although the cost is a fair bit
I once had a set like that. Fortunately now I don'tI've replaced 3 out of 4 bags... last one to do either today or tomorrow. First time I've done anything like this and relatively straightforward.
Anyway, the car was still on its original bags from 1994/1995. They were properly perished.
They seem to have held air ok, but who knows for sure. I did find the car with the rear right down once ages ago. And at times I thought it looked tilted to one side.
I've replaced 3 out of 4 bags... last one to do either today or tomorrow. First time I've done anything like this and relatively straightforward.
Anyway, the car was still on its original bags from 1994/1995. They were properly perished.
They seem to have held air ok, but who knows for sure. I did find the car with the rear right down once ages ago. And at times I thought it looked tilted to one side.
Year and week of manufacture is stamped in the rubber, 95-44 and car was first registered in 1996.
Yes, I didn't expect them to be original. I don't have much service history but it has only done 51k kilometres since new. The shocks need replacing so that is next on my list. I overhauled the compressor today with a kit from X8R and the difference is as clear as night and day. Before it would sometimes rise quickly, other times it would take ages. Now it feels almost instant in comparison. The old piston seal had a visible gap. I wonder whether the old bags and worn seal may have been the cause of the original error. I will monitor it for while and see whether the driver pack needs replacing.I'm amazed they lasted that long. That's way past their intended life-span.
Yes, I didn't expect them to be original. I don't have much service history but it has only done 51k kilometres since new. The shocks need replacing so that is next on my list. I overhauled the compressor today with a kit from X8R and the difference is as clear as night and day. Before it would sometimes rise quickly, other times it would take ages. Now it feels almost instant in comparison. The old piston seal had a visible gap. I wonder whether the old bags and worn seal may have been the cause of the original error. I will monitor it for while and see whether the driver pack needs replacing.
Remove the silencer from the eas block you can hear its activity while your using your carYes, I didn't expect them to be original. I don't have much service history but it has only done 51k kilometres since new. The shocks need replacing so that is next on my list. I overhauled the compressor today with a kit from X8R and the difference is as clear as night and day. Before it would sometimes rise quickly, other times it would take ages. Now it feels almost instant in comparison. The old piston seal had a visible gap. I wonder whether the old bags and worn seal may have been the cause of the original error. I will monitor it for while and see whether the driver pack needs replacing.
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!