P38A door lock will not open inside & out

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
It must my age but I am sorry I don t understand the wit I did really think the site was to pass on help but to help one another now days it not COOL i assume that s the trouble with being an old fart
Oh dear, we've gone and put you off. Sorry. :(
This site definitely IS the #1 spot for help on all the older models of LR products.
Really Glad to see that you have resolved your problem.
Did lowering the glass (as I said) allow you to get a pick in there to pull the latch?
Those clips can get brittle with age, but £13-ish for a new one is a bit steep isn't it?
 
Oh dear, we've gone and put you off. Sorry. :(
This site definitely IS the #1 spot for help on all the older models of LR products.
Really Glad to see that you have resolved your problem.
Did lowering the glass (as I said) allow you to get a pick in there to pull the latch?
Those clips can get brittle with age, but £13-ish for a new one is a bit steep isn't it?
Thanks for your help I went out and tried it again and the blessed door opened so was able to take the door card of.
From there it got a bit complicated, got in touch with my supplier and was told that I needed to buy the inner door handle
£80. Went on line and found the land rover part No FVF10002L[ sorry to upset any but I payed £5 for them in sealed LAND ROVER
PACKS] will fit on Monday will let you know how i get on
 
Thanks for your help I went out and tried it again and the blessed door opened so was able to take the door card of.
From there it got a bit complicated, got in touch with my supplier and was told that I needed to buy the inner door handle
£80. Went on line and found the land rover part No FVF10002L[ sorry to upset any but I payed £5 for them in sealed LAND ROVER
PACKS] will fit on Monday will let you know how i get on
From memory I don't think those clips fit on the interior handle where the cable attaches,they are more for the rods from the latch.
Sorry did i miss how the door get opened in the end,,,,,,,,,o_O
Magic.
 
Last edited:
Sorry did i miss how the door get opened in the end,,,,,,,,,o_O
From memory I don't think those clips fit on the interior handle where the cable attaches,they are more for the rods from the latch.

Magic.
I think the green ones are for the rods the one I have purchased is white keep fingers crossed thank you for pointing it out
will let you know how I get on
 
Take a couple of pictures of your beloved classic. We like pictures, just don't ask @tomcat59alan, @holidaychicken, @kurtjohnson10 or @Broke Again for any of theirs!!! ;)
56a8ad1e86803331096f0446737ee290--land-rover.jpg
 
Last edited:
I would if I could but I don t know how sorry
I have spent the last 5 years stripping it down to the bare chassis welding the chassis in 2 or 3 holes it was not bad a condition other
than having to remanufact a new rear cross member

When you are writing your replys over bottom right you will see a box (Upload a file) click on that ,then you will get a bit that says browse, click on that find you pic from your gallery and click on that it should then load, give it a go whats the worst that can happen not a lot.
 
Back
Top