do rebuilt freelander v6 motors last?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
E

ericwest

Member
Posts
25
Location
california
I have noticed a few UK company's selling rebuilt 2.5L v6 motors for freelander.....they cost about 5k USD shipped to California....not a bad price...but do rebuilt v6 engines last for a decent time??...one of the rebuild company's says they make their own sleeves for the cylinders..according to them their sleeve fits tighter and corrects an engineering fault in the original sleeves...just wondering if a rebuilt v6 can last for 50k miles or so...
 
Would you not be cheaper knitting a roewe 750 kv6 instead? They have 1000s of the engines spare brand new. Just pull off the digital throttle body and swap anything over Freelander specific and your golden.

Ive been seriously looking into a new crate engine for my zt-t as a back up.

Its the standard 177 cam engine sadly, not the 190 cam in the roewe 750 BTW.
 
$5,000 sounds expensive to me, although it would likely depend on what components are replaced and what are machined.
Last KV6 I rebuilt didn't cost anything like that however.

As for how long it lasts. That's entirely dependent on the components used. If I rebuilt a KV6, I'd expect to see well over 100K miles out of it.

I don't quite know why the place in question would have made there own liners. There's nothing actually wrong with the Rover liners, so why they'd make there own is a bit strange. The original liners are top quality and manufactured to very tight tolerances. The block is more likely to be machined inaccurately than the liners. If the engine being reconditioned was overheated, then the HGs will fail very quickly. The heads go soft, even with mild overheating. If there's any doubt about the heads, then replacement castings are needed.

I wonder how much shipping to the US would be?. I've a rebuilt low mileage KV6 in my workshop, waiting for a project that I'll probably never have time to start. I've only kept it as a potential spare for the mother in law's V6 FL1.
 
Last edited:
ColinNI said:
Would you not be cheaper knitting a roewe 750 kv6 instead? They have 1000s of the engines spare brand new. Just pull off the digital throttle body and swap anything over Freelander specific and your golden.

Ive been seriously looking into a new crate engine for my zt-t as a back up.

Its the standard 177 cam engine sadly, not the 190 cam in the roewe 750 BTW.
Click to expand...

That's not a bad idea, especially as the FL1 used the 177 Bhp cam KV6 anyway.
 
Hey guys thanks for the great ideas....colinNI do you know of a source for the roewe motor? I would like to check the pricing....Nodge68...the shipping to California is surprisingly low...about $500 USD to lis Angeles or San Francisco......so if your interested in selling your motor let me know
 
Honestly until October you could buy complete kv6 units on alibaba.com, min order was 5 for around £6000 for all 5 plus postage.

I had planned to buy 5 and sell them complete via owners forum but due to a change of job and lack of current cash it ruined plans.

It was working out roughly £1100 for a brand new engine made in 2016/2017 with belts everything done ready to drop into a 75 or zt. You could get them to £600 delivered if you bought 50 of them also.

When you price up belts suddenly it became a serious option as all you needed to swap was part of loom if you had the older style coils and throttle body.
 
ericwest said:
Nodge68...the shipping to California is surprisingly low...about $500 USD to lis Angeles or San Francisco......so if your interested in selling your motor let me know
Click to expand...

I'll have a serious think about selling it on. I've quite a bit of cash tied up in it, so I might be tempted to recover some of that. I'll need to check it over for storage damage first though, as it's been sat in my unheated workshop for a few years now. How desperate are you for a replacement ?
 
I am pretty desperate...I love the car...and very much want to fix it...I did see a discovery for sale cheap...but like the freelander better...but some say the discovery has a buck v8 ...that's probably an easier vehicle to repair I suppose.
 
ericwest said:
I am pretty desperate...I love the car...and very much want to fix it...I did see a discovery for sale cheap...but like the freelander better...but some say the discovery has a buck v8 ...that's probably an easier vehicle to repair I suppose.
Click to expand...
Mine wasn't - it was always going wrong - almost as bad as a KV6 :eek:

Generally though I don't think they're to bad.

But Freelander is a betterer car :)
 
ifloochies said:
No it's not!:rolleyes:
Click to expand...
Forgot its probably still Panto season in UK :)

OhYesItIs.jpg
 
ericwest said:
Oh..I meant Buick v8...but sounds like it's not to reliable
Click to expand...

It was an old buick V8 which Rover did a decent job of making it lighter and less durable than its US built cousin. It's actually a pretty good engine, that can be made very reliable. It suffers from cracked heads and gasket problems, but otherwise is pretty good. The Discovery isn't as good a road vehicle as the Freelander though. The Freelander has car like handling and road manners whereas the Discovery is a lumbering barge. Off road, the Discovery has the edge however.
 
You must log in or register to reply here.

Similar threads

Mph007365
1999 P38A 2.5D WHAT IVE DONE, WOULD I DO IT AGAIN?
Replies
4
Views
1K
Salisbury Nick
Salisbury Nick
S
F4 (C1151), Three Amigos and Brake light of F1 V6 in 3rd World Country
2 3
Replies
49
Views
9K
Misbugs
M
E
can anyone tell me if rebuild kits are available for the freelander 2.5l v6?..
Replies
7
Views
978
Rich in Vancouver
Rich in Vancouver
D
Freelander 1 TD4 for Sale
Replies
4
Views
2K
glynnp
G
Nodge68
V6 Heart Transplant
2 3
Replies
47
Views
18K
Northernlady
N
Back
Top