It really depends on what quality you want... I don't think I've gone for the cheapest but certainly not the most expensive. I don't intend to do mega heavy off roading though just in the forest and round local fields so I didn't see the point in mega buck stuff. Best of luck with it though, I got most of my stuff from Island 4x4 and Paddocks, but depending on what you want there are loads of places...
Thanks mate, it is a pain putting stuff away but if you saw my garage you'd know I've got so much stuff if I don't put it away it gets very messy very quickly.... My wife already thinks its a s£$t tip.... Although its taking time to do I'm really enjoying the learning experience, I've never done anything like this and its great to take on things that I never understood or even dreamed of doing, if you'd said to me before I'd started that I would be doing a timing belt I would have laughed but when taking it stage by stage I've learned about each bit...... It'll be nice once its done to know that I can fix or replace anything on the car...
Doing a fine job here
I hopefully will have this to look forward to in a year or so when i get mine :lol:
... Best of luck for when you do yours lots of pics
.... I hurmphed and mumbled about Haynes description being rubbish, he didn't take that as an excuse and said I was still
So once I'd done all that I washed out the rad and started on the front body work which I was still on when it got dark tonight. Just having a little problem with the welding, trying to get clean metal to get a clean weld is a night mare....but if I keep cutting back I won't have anything left and I don't want to replace the whole lot. Think I may buy those part repair panels from island. Anyway we will see....
cost a bit but seam sealed everything out of the box, etch primed and few coats of polyurethane paint. Mine did need every panel listed on yrm though
That tool looks good, going on the list
Is it your front wings you are welding? If so I gave up on mine and brought 2 new ones
Now where are the other pics
I will have another look on YRM s site, I was going to buy the little side trims for the boot floor from them as well so might get everything in one... The other thing is the front body mount which need repairing trying to work out how I can lift the body in that area to get them out. At the rear it was fine cause I jacked up the cross member cant do that at the front. Might try from the front of the new sill and see if that lifts it enough just to drop the rubber out....
Yeah those are the ones I just don't really want to replace the light box as its in ok nick... I have got some u section 3mm steel which fits in perfectly i just need to weld a mount hole to it then I can cut out the old one and weld this one in place... if that makes any sense whatsoever..
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!
