Disco tray back project

Hicap phill · Jan 8, 2018

Used to do rally recovery and when bored find a few challenges to do. The looks I got off people when my 90 special turned up with hidden rear winches dragging myself & others around.
Make sure you get a fit winch bitch who you trust to connect you to a tree that's not rotten

Don't worry I got my own back when I started racing & turn the intercom off.

Keep building & updating us. Looking good

Jack300tray · Jan 22, 2018

Been busy last week! Iv decided to fit some arches to the front of the truck to stop the engine getting to plastered off road, also gives me that little bit more storage room haha one thing tray backs lack!!!! Only needs a lick of paint to finish the job off

I will move the air filter to the top of the cab at some point but for now it's tucked under the hood.

Also fitted the spare wheel carrier to the back of the cage and have to say with the extra weight makes all the difference on the road.! Rides a lot smoother

dieseldog69 · Jan 23, 2018

Jack300tray said:
Also fitted the spare wheel carrier to the back of the cage and have to say with the extra weight makes all the difference on the road.! Rides a lot smoother

It'll ride better still when you bolt a 9000lb winch on that rear cross member

Really came together fast that didn't it, nice when you've got a decent workshop to play in

Jack300tray · Jan 25, 2018

dieseldog69 said:
It'll ride better still when you bolt a 9000lb winch on that rear cross member

Plan is to add a few more tubes onto the back aswell! All well and good chopping a truck but you don't realise how much difference it makes taking the weight of the rear end haha

Joemac434 · Jan 25, 2018

Not that my opinion count for anything but that's some fine engineering and a great series of pics etc,don't know why it's taken me this long to find it but following with great interest

dieseldog69 · Jan 25, 2018

Jack300tray said:
Plan is to add a few more tubes onto the back aswell! All well and good chopping a truck but you don't realise how much difference it makes taking the weight of the rear end haha

Have you thought about relocating your batteries to the back to cut the nose weight? That's on my list with the new electrical system. The 069 batteries (I have 2 of these) weigh 36 kilo's! The monster 624se batteries are 27 kilo's each

Just an idea.

Jack300tray · Jan 28, 2018

dieseldog69 said:
Have you thought about relocating your batteries to the back to cut the nose weight?

I currently have the battery behind the passenger seat but eventually will put twin battery's on the rear along with the rad and a winch one day when the funds are in hahaha

Hicap phill · Jan 28, 2018

Like the inner wings. Some where to put the cups of tea while fixing the engine

Here is a thought. Fuel tank & batteries? Make sure all is bolted down well.
Harness mounts?
Get a gel battery this can live in the cab no chance of spillage.
Your work is good keep building

Disco tray back project

Hicap phill

Well-Known Member

Jack300tray

Member

dieseldog69

Well-Known Member

Jack300tray

Member

Joemac434

Well-Known Member

dieseldog69

Well-Known Member

Jack300tray

Member

Hicap phill

Well-Known Member

Similar threads