JoelC
Active Member
- Posts
- 776
- Location
- South Yorkshire
What make / amps is the alternator?
Disco 1 3 door R reg 97 breaking + other new parts
- Thread starter Bump
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 7,332
- Location
- Under my landy
I feel you're underselling the roof rack by not mentioning that it's GALVANIZED.
And yes, the engine is definitely a good 'un.
good point, thanks Mark
- Posts
- 7,332
- Location
- Under my landy
Not breaking the engine, it's going complete with all ancillaries i'm afraid.
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
Bump you get my PM ?
- Posts
- 7,332
- Location
- Under my landy
- Posts
- 7,332
- Location
- Under my landy
Carpets are not ripped, but, are grubby, it's been used as a work horse for some time, they may clean up a bit, but, they're no where near good condition.
Rest of the interior is ok, although Mark L has first refusal on the dash. - but it is in very good condition, it's all straight and flat where it should be, a few additional holes from where CB's were mounted, etc. but generally all ok - can send pics if you like?
- Posts
- 7,332
- Location
- Under my landy
All parts now available from today! Got a replacement vehicle so happy to start removing parts
Mark L
Well-Known Member
- Posts
- 2,693
- Location
- Tamworth - Staffs
Let the dash go, Mike. I've got another Disco lined up which is donating its entire interior to me amongst many other things.
Many thanks though.
Many thanks though.
- Posts
- 7,332
- Location
- Under my landy
cool, thanks - in which case - whole lot is available Jamie
Mark L
Well-Known Member
- Posts
- 2,693
- Location
- Tamworth - Staffs
The dash on Bump's D1 is as mint as you'll get. Not a single sign of dash curl.
dodge77
New Member
- Posts
- 207
- Location
- bromsgrove - worcestershire
a crane i repaired........
and a little bit of arc welding (the weld unpainted is mine)
any pics of the mud tyres and stuff. quite interested in the lift kit and body lift
- Posts
- 7,332
- Location
- Under my landy
will upload via photobucket later, but, for now you can see them on my dropbox acount hopefully...
https://www.dropbox.com/s/ax6wnikxhu0er44/2012-12-22 14.09.29.jpg
for the tyres
Dash:
https://www.dropbox.com/s/400usdh86q89d9a/2012-12-22 14.08.24.jpg
let me know if they work. can get you more photos of both but just heading out for the evening right now.
https://www.dropbox.com/s/ax6wnikxhu0er44/2012-12-22 14.09.29.jpg
for the tyres
Dash:
https://www.dropbox.com/s/400usdh86q89d9a/2012-12-22 14.08.24.jpg
let me know if they work. can get you more photos of both but just heading out for the evening right now.
- Posts
- 7,332
- Location
- Under my landy
only issues are:
1. i installed a power outlet in front of the passenger so drilled a hole for it. can leave it in for you, will provide detailed photos tomorrow, it is a neat installation.
2. 2 small holes where the CB bracket is mounted.
if i knew i was breaking it i wouldn't have bothered - only drilled both holes 2 weeks ago
Mark L
Well-Known Member
- Posts
- 2,693
- Location
- Tamworth - Staffs
Didn't realise they were Cooper Discoverer STTs. You should shift them pretty quickly, to be fair.
- Posts
- 7,332
- Location
- Under my landy
lift springs can be seen here:
https://www.dropbox.com/s/5bqxcko2xdu54ly/2012-12-22 14.09.07.jpg
no photo of shocks yet.
3.5" body lift is missing one set of spacers, i think there are 8 rather than 10. Will sell cheap because of this
- Posts
- 7,332
- Location
- Under my landy
dodge77
New Member
- Posts
- 207
- Location
- bromsgrove - worcestershire
what size are the tyres???(coopers)
tomtomtom
Active Member
- Posts
- 240
- Location
- Evesham, Worcestershire
Do you happen to have the frames that fit the front seats to the floor? Im after a passenger one as mine has snapped?
Tom
Tom
