- Posts
- 16,354
- Location
- Benfleet, Essex
@Poacher 32
Please forgive me if you have already done all this and I am therefore upsetting you. The EKA entry is a real pig at times; you have to be so very, very careful.
I know the manual tells you how to do it, but it doesn't accentuate how careful you have to be.
Start.....key turned to locked & back to vertical four times. <<Tells the BecM you are now going to enter the EKA Code>
Then <1st digit> entered in the unlocked (clockwise) direction and back to vertical for each time.
Then <2nd> digit entered in the locked (anti-clockwise) direction and back to vertical for each time.
Then <3rd> digit entered in the unlocked (clockwise) direction and back to vertical for each time.
Then <4th> digit entered in the locked (anti-clockwise) direction and back to vertical for each time.
Finally, Turn once to unlocked and all the doors should unlock and the car "should" be re-mobilised.
It is very important to make sure you deliberately and carefully execute each key-turn AND back to vertical (and no further).
The doorlock contacts do go dodgy with age & use.
The flashing of the side-repeaters or the dashboard lamp (depending on how the system was set up) are your only indications that your entries are being seen.
If they are not consistently being seen then you will need a Nanocom to re-mobilise the engine.
Please forgive me if you have already done all this and I am therefore upsetting you. The EKA entry is a real pig at times; you have to be so very, very careful.
I know the manual tells you how to do it, but it doesn't accentuate how careful you have to be.
Start.....key turned to locked & back to vertical four times. <<Tells the BecM you are now going to enter the EKA Code>
Then <1st digit> entered in the unlocked (clockwise) direction and back to vertical for each time.
Then <2nd> digit entered in the locked (anti-clockwise) direction and back to vertical for each time.
Then <3rd> digit entered in the unlocked (clockwise) direction and back to vertical for each time.
Then <4th> digit entered in the locked (anti-clockwise) direction and back to vertical for each time.
Finally, Turn once to unlocked and all the doors should unlock and the car "should" be re-mobilised.
It is very important to make sure you deliberately and carefully execute each key-turn AND back to vertical (and no further).
The doorlock contacts do go dodgy with age & use.
The flashing of the side-repeaters or the dashboard lamp (depending on how the system was set up) are your only indications that your entries are being seen.
If they are not consistently being seen then you will need a Nanocom to re-mobilise the engine.
