Damn rear airbag!
- Thread starter johnmuk
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Datatek
Well-Known Member
- Posts
- 44,883
- Location
- Near Poitiers SW France
Push the pipe in, then push on the brass coller with a suitable implement, keep the pressure on then pull the pipe.
Don't cut the pipe, if you look carefully there is a little raised collar on the pipe that will prevent it going back in if it's cut too short. After removal it's possible to cut about 5mm off unless it's been done before.
Don't cut the pipe, if you look carefully there is a little raised collar on the pipe that will prevent it going back in if it's cut too short. After removal it's possible to cut about 5mm off unless it's been done before.
c099895
New Member
- Posts
- 436
- Location
- nr Hornchurch, Essex
That ull do it ... Not my 1st choice tho
