Chevy 454 rebuild with 8v71 blower

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Brought the crank in and gave it a quick polish up by hand with some 2000 grit and WD40

Looks perfect now. Been given a light spray of oil and its living in the corner of my room where its nice and dry so no surface rust can form.


My local engine man is ordering me in some piston rings from Perfect circle (I presume as he buys decent stuff) and a set of new head bolts too :)



Just been messing with the blower, spinning it up on the drill and it really does create boost :eek:
 
15mpg!!

more like 7..sorry but you got no hope of 15...and i dont care where the figures came from..its just physics..



enjoy the film..
 
Last edited:
310kg built up so whatever that is in lbs. Mine lighter with the ally intake manifold

GB springs are making me up some 4 leaf fronts or possibly 5 once I weigh it and the chassis together
 
Can we stick to one unit of measurement and not mix and match please? :eek:

Not that I have a problem with imperial or metric, I just can't stop laughing at the almost alternating posts of lbs, kg, lbs...... :D
 
marccleave said:
Can we stick to one unit of measurement and not mix and match please? :eek:

Not that I have a problem with imperial or metric, I just can't stop laughing at the almost alternating posts of lbs, kg, lbs...... :D
Click to expand...

Well if the merkin would let me answer the questions posted on my own thread we'd all be in Kg's :p


I don't like working in lbs, kgs are much nicer
 
Will do, waiting for the head bolts to arrive so I can put it together!


Your ringtone may be a little loud though, first run in is going straight up to 2000-2500 rpm to break the cam in
 
Saw your big clear out for sale thread. Saw the 8v71 supercharger in there. (No I don't want it! :p)

You not going for supercharged then now? If so why the change of mind & if not then just ignore me!
 
Trouble with running a blower with carbs is that you get a wet charge by the time it reaches the engine not the lovely fine mist that the carb delivers. In my opinion blowers only really work with injected motors. A blown big block in a Series will scare you stupid, with only an 88" wheelbase it'd be almost undrivable.
 
marccleave said:
Saw your big clear out for sale thread. Saw the 8v71 supercharger in there. (No I don't want it! :p)

You not going for supercharged then now? If so why the change of mind & if not then just ignore me!
Click to expand...

I could use the money so unfortunately its up for sale, if it sells it'll give me plenty of cash to finish off the build as theres a decent amount left to buy :(


Spyderman said:
Trouble with running a blower with carbs is that you get a wet charge by the time it reaches the engine not the lovely fine mist that the carb delivers. In my opinion blowers only really work with injected motors. A blown big block in a Series will scare you stupid, with only an 88" wheelbase it'd be almost undrivable.
Click to expand...

It might get a blower at a later date but for now I'll leave it as an NA, helps insurance a lot too!
 
Pistons are re-ringed and if I have time tomorrow I'll put them into the block


Head bolts need to come in from the states but should get the moly paste later this week so I can pop the crank and cam in :)
 
You must log in or register to reply here.

Similar threads

hef19898
3.5 V8 Carb Engine Blow Back after cam Shaft replacement
2 3
Replies
40
Views
5K
hef19898
hef19898
S
2012 Disco 4 Just wont start.
2
Replies
28
Views
5K
Graculus
Graculus
Goc3k
Discovery 1 SOLD 1997 300TDI manual D1, Winchester
Replies
16
Views
4K
Goc3k
Goc3k
L
For Sale Lots of accessories, parts and tools
Replies
1
Views
2K
Litch
L
hef19898
Fitting Kent H200 cam to 3.5 on carbs
Replies
17
Views
2K
Gord Wedman
G
Back
Top