Datatek
Well-Known Member
- Posts
- 45,015
- Location
- Near Poitiers SW France
I don't see the brake switch in the circuit for the pump.
Brake problem P38 Auto Diesel Auto
- Thread starter Paul vice
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 19,307
- Location
- Buckinghamshire, UK. ('95 DT)
OK. Must just be used in the modulator then.
Datatek
Well-Known Member
- Posts
- 45,015
- Location
- Near Poitiers SW France
ABS ECU and BECM
- Posts
- 58,170
- Location
- Preston Lancs.
When brake is pressed brake switch switches on brake lamps and disengages cruise control if applicable.
Fitted second hand pump as soon as I turned ignition on I can hear it running . Break peddle still the same and all three warning lights still on. What's my next step. Thanks. P.S.. try and keep it easy
Datatek
Well-Known Member
- Posts
- 45,015
- Location
- Near Poitiers SW France
Never changed a pump, but I would expect you will need to bleed the brake system. this has to be done exactly in accordance with the procedure laid down in RAVE.
Will bleeding the system solve my problem, excuse me if this is a dumb question but I am a complete novice
- Posts
- 58,170
- Location
- Preston Lancs.
Paul with due respect if you are a complete novice you should not be playing with brakes. If you have changed the pump the system will need bleeding. That may sort it or it may not. I really do suggest you get someone who knows what they are doing involved.
- Posts
- 19,307
- Location
- Buckinghamshire, UK. ('95 DT)
Read RAVE . It is a Godsend.
- Posts
- 58,170
- Location
- Preston Lancs.
