Morning, appreciate some help please. I had to fit a new front brake caliper to drivers side the other week, after doing this when braking hard it pulls to the left but feels like there is more braking power to that side, firstly I thought the caliper was faulty so got another sent. But after fitting this at the weekend it is still doing it again I bled the system cleaned slider bolts both sides and re-greased. I only fitted new disc pads, brake disc, new brake hoses all round and replaced brake fluid 5 mths ago. Thank you for any advice.
Disco 2 Brake Issue pulling to the left Disco 2 TD5
- Thread starter goofy2000
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Pawl
Well-Known Member
- Posts
- 568
- Location
- West Midlands, UK
Land Rover changed the D2s front caliper piston diameter during production to decrease the amount of front braking vs rear.
Did you get the correct part no. for your car year / VIN?
Did you get the correct part no. for your car year / VIN?
Iancorky
Well-Known Member
- Posts
- 1,365
sierrafery
Well-Known Member
- Posts
- 17,871
- Location
- Arad/Romania
^^^ 100% true, also measure the disc's thickness cos those have to be the same as well, even 1mm can make a difference
