Bonnet stuck shut

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

LogCutter

Member
Posts
11
Hi folks,
I have been adjusting the bonnet on my 1989 RRC and have given it a half turn too much! The bonnet is now stuck shut and I can't open in the usual way.
Grateful for any advice as to how to rectify the situation.
The grill is of course in situ so not easy to access.
Thanks In anticipation
 
Is the grille still off? If not you need to get that off first and then get a head torch and probe underneath the bonnet catches to trigger the release cables manually...it's a pita
 
Is the grille still off? If not you need to get that off first and then get a head torch and probe underneath the bonnet catches to trigger the release cables manually...it's a pita
Thanks romanrob. Sadly the grill wasn't off, although it will be next time I need to adjust it. I did get there in the end with a long screwdriver and prodding various catches until it released. Got there in the end. Thanks for the input. 👍
 
Back
Top