Bankzs 110 CSW XS Build
- Thread starter bankz5152
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
KISSMYAURA
Well-Known Member
- Posts
- 2,883
- Location
- KENT
LR has issued a new standard for durability testing the "joshtest' we have yet to see how many suppliers do in this space,
News just in ......Britpart and Terrafirma have ceased trading as a result.
News just in ......Britpart and Terrafirma have ceased trading as a result.
Hicap phill
Well-Known Member
- Posts
- 16,640
- Location
- Wiltshire
That’s some torque… think as all your stuff is HD when it goes,it goes well…
Form them pics I would say the shaft splines would not give way and expanded while been twisted. Once it was wedged in the stub that’s when it snapped the shaft.
(See a cheap end cap would have blown the splines & saved you time)
still love all your updates & testing of parts
Form them pics I would say the shaft splines would not give way and expanded while been twisted. Once it was wedged in the stub that’s when it snapped the shaft.
(See a cheap end cap would have blown the splines & saved you time)
still love all your updates & testing of parts
KISSMYAURA
Well-Known Member
- Posts
- 2,883
- Location
- KENT
love it built in redundacy and sacrificial parts selection due to extreme driver superb!!!!
bankz5152
Well-Known Member
- Posts
- 9,349
- Location
- South London/North Kent
Yeah standard shafts, that one only went in in December!Tbf I like the look of the HD flanges! They worked well on my old 110. Often talked about is having cheap flanges or even cutting a few splines off them to make them specifically weaker but that can cause its own issues because the shafts start to fret and cause premature wear and thus break under minimal load!
Quite impressive how you can see the shaft has almost done a full 360 before snapping and exploding!
I also don't really want to fit HD shafts & CVs because that will just translate the shock further down the line resulting in a blown diff or box. So may keep the 600nm slow blow fuses
Also never really an issue only takes an hour to change a shaft & CV only a touch longer for bearings/stub axles just depends if I have the parts on hand!
It was definitely not because I had in pinned in 3rd low on the limiter at 34psi of boost going over large ruts in a 2.7 ton truck
Those HD CVs are seriously expensive too. I agree with the above - I reckon if you hadve had cheap members they would’ve cheesed up first. Do you decide where the weakest link is to be and make it the cheapest part lol? Like you said, go HD with the shafts and it could just end up smashing diff or transfer. Watching this with interest as I got a torquey build planned for mine!
bankz5152
Well-Known Member
- Posts
- 9,349
- Location
- South London/North Kent
Oem flanges dont have the best tolerances so you do get a fair bit of fretting and transmission slap. Fairly reduced with the HD flanges!
Think ill stick with britpart shafts and CVs takes a fair bit of lead foot and shockload to actually break them and 9/10 its the short side!
Long side has enough length it can twist far more before actually snapping.
That’s interesting. I was so snobby that it was gkn or nothing for me and I only drive across fields.
bankz5152
Well-Known Member
- Posts
- 9,349
- Location
- South London/North Kent
I used to be the same until the price went thru the roof and there was almost no difference in quality to Britpart...
bankz5152
Well-Known Member
- Posts
- 9,349
- Location
- South London/North Kent
Joy of joys. Thought Id take the 110 out for a a bit, got all of 10 meters before I heard an unsettling slapping noise...
And the crank pulley is seconds away from letting go
So need to replace that now
On the hand made another snorkel & airbox for a D2, with a little custom touch for the intake grill. He called his 90 "The Donkey" which is sadly being sold soon so it lives on with the D2!
And the crank pulley is seconds away from letting go
So need to replace that now
On the hand made another snorkel & airbox for a D2, with a little custom touch for the intake grill. He called his 90 "The Donkey" which is sadly being sold soon so it lives on with the D2!
Similar threads
