Back plates / dust shields ?
- Thread starter Timmers
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Need angle grinder and access to use it, cannot remember if I had to take caliper and carrier off.
I would suggest as the rears are not making any noise/causing any trouble I would leave them be.
ur very welcome and indeed ur be surprised of how much knowledge ur start to pick up
To be honest mate they are noisy as well. Just left side front and rear
cheers
Looks like you are going to be busy!To be honest mate they are noisy as well. Just left side front and rear
The joys of old complicated cars.
To be honest mate they are noisy as well. Just left side front and rear
does the noise only happen when u apply the brakes plse , also does the EPB also make a noise when applying it
get a large hacksaw blade put it between the shield and disc to ensure nothing is there or shield is touching the disc
if that all checks out the brakes might just need taking apart, cleaning , ensuring the slider pins are free and applying suitable grease
if the EPB shoes have to come off ensure to put copperslip on the shoes where they touch the back plates
Indeed all depends when the noise happens , plus do u get a noise when going round corners or only happens when ur going straight plse , thks
It’s already cost me the same as I paid for it.
I think it was a bit of a lemon. Endless things.
Lots of sensor issues /limp modes
Injector issues.
Then to cap it all the high pressure fuel valve.
So bought it for £5k 120000 miles
Spent about 5K on it. 258000 miles now.
I love her.
Attachments
Hi mate
will be in the same boat next month as on my last MOT it said my near side front and rear calipers are sticking so been looking at this kit , @ £350 inc vat and postage , MOT is due the end of sep
comes with the following
INCLUDES...
FRONT BRAKE DISCS X2
FRONT PADS SET.
FRONT WEAR SENSOR
FRONT BRAKE CALIPERS BOTH FRONT
REAR BRAKE DISCS X2
REAR BRAKE PADS SET
REAR WEAR SENSOR
REAR BRAKE CALIPERS X2
FULL SET OF 4 HANDBRAKE SHOES AND FULL FITTING KIT.
already done all the brake hoses/ short pipes and drop links
Nope. Noise occurs on forward and reverse.
I hammered the plates with a cold chisel to maybe bend them away a bit but no good.
But think of the labour charges you’re saving.
Even if I can service my car and just pay for jobs that are beyond me she is solid. So should go in for ages.
And I can’t afford to buy another.
It’s already cost me the same as I paid for it.
I think it was a bit of a lemon. Endless things.
Lots of sensor issues /limp modes
Injector issues.
Then to cap it all the high pressure fuel valve.
So bought it for £5k 120000 miles
Spent about 5K on it. 258000 miles now.
I love her.
really like the colour and indeed think when someone comes along who want them just right u start to find all the previous bodges etc and takes age just to resolve them
luckily they weren’t fitted with side steps as they can become water traps causing rust on the sills
will be doing my brakes all round next month and been looking at the kit in the other post , at least the brakes will have then been totally replaced , including all the hoses , drop links front to back , already rebuilt the entire suspension and cabin airbags
many thks , daft question but u don’t have side steps fitted do u as they can rattle if they’ve become slight loose or rub against the sills
ref the brakes , get rid of the front plates and see if it makes any difference
also diagnostics , what one do u use plse , thks
I DO have side steps. I’ll check. But pretty sure it’s not them.but no question with me is daft. Promise you.
re the front plates.I have one of these. Amazon product
But think of the labour charges you’re saving.
Even if I can service my car and just pay for jobs that are beyond me she is solid. So should go in for ages.
And I can’t afford to buy another.
Admittedly do have a local sole trader mechanic who does the servicing for me and might get him to do these for me , alas I’ve got a screwed up back so it’s the removal of the tyres that would kill me
likewise with regards to replacement , the ULEZ if it comes into force will be 1 x mile up the road , trouble is my parents , hospital , shops and walking places for my dog are all within it and seriously can’t start shelling out £12.50 each time I go within the zone
plus because I’m just outside it there’s no chance of getting a scrap payment , which in reality would be criminal to get it crushed and then there no way I could afford a euro 6 discovery where many are going for 35k +
see that diesel D3 that are in the proposed ULEZ zone dropping in price like a stone
sorry I’m waffling again, lol
I DO have side steps. I’ll check. But pretty sure it’s not them.but no question with me is daft. Promise you.
I have one of these. Amazon product
Many thks and indeed they can rattle ever so slightly to cause a noise , maybe get someone to drive it for u whilst u listen with the window down
or could always unbolt the near side step to see if it makes any difference , would just hate for u to mess around with the brakes if it’s not that
awesome ref the code reader as there great for the money and very useful
Nightmare on the back and ULEZ.
I was caught by Bristol ULEZ. I only caught the edge of it and didn’t realise. I complained and they let me off.
Nightmare on the back and ULEZ.
I was caught by Bristol ULEZ. I only caught the edge of it and didn’t realise. I complained and they let me off.
Indeed , that was a result getting let off , think the ULEZ fine is £180
Yep. I was amazed. I didn’t get the first letter because of the postal strike. It was really delayed. By the time I got it it had already doubled. Then it took another three weeks to sort it.
I didn’t shout. I was calm. Calm and polite wins the day. If it doesn’t then you shout!
Remove caliper and slides clean slides grease slides refit slides job done.
If piston tight pop a pad out and pump pedal so piston comes out 1/4 inch or so, then using a stringe with a fine needle inject a little brake fluid through piston boot, push piston in and out a few times(not to far out) pad back in then give it a whirl.
The cheapest of the cheap rear calipers are actually okay.
Similar threads
