Bobbyell
New Member
- Posts
- 43
- Location
- Hawarden. Chester
Happy new year fellas
Anyone going greenlaning in or around s Oxfordshire?
- Thread starter stevo6
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Happy New Year all!!
I spent the morning giving the Defender and my mountain bike a good clean. Realised that mine had loads more mud up the sides compared to all the others due the wheel spacers on mine...Might have to look at moving or extending my mud flaps.
Bobbyell, I'm up for a Nav rally and willing to give you a hand setting up or recceing routes etc. Just let me know.
I spent the morning giving the Defender and my mountain bike a good clean. Realised that mine had loads more mud up the sides compared to all the others due the wheel spacers on mine...Might have to look at moving or extending my mud flaps.
Bobbyell, I'm up for a Nav rally and willing to give you a hand setting up or recceing routes etc. Just let me know.
Freediscoranger
Active Member
- Posts
- 744
- Location
- Cirencester/ west shropshire
New rear HD springs on! Easy job! Except the car was determined to fall off the jacks, and did, twice. Luckily onto the blocks of wood so only dropped an inch.msits a good 3" higher now (and level) 
bring on the lanes!
And happy new year!
bring on the lanes!And happy new year!
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
New rear HD springs on! Easy job! Except the car was determined to fall off the jacks, and did, twice. Luckily onto the blocks of wood so only dropped an inch.msits a good 3" higher now (and level)
And happy new year!
Which ones did you get???
Freediscoranger
Active Member
- Posts
- 744
- Location
- Cirencester/ west shropshire
The ones on offer on mm 4x4 . They're britpart... But black.
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Freediscoranger
Active Member
- Posts
- 744
- Location
- Cirencester/ west shropshire
Yep, there them! Why?
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
About to fit 265/75/16's to my disco and the 235/70/16 muds I normally use were catching on the back when I went laning. I also carry a fair bit of gear in the back of mine. If it means a bit less cutting of the wheel arches they'll be worth it.
Freediscoranger
Active Member
- Posts
- 744
- Location
- Cirencester/ west shropshire
I've had 265/75 on for a while now, they really filled the arches, but with the HD on the back they're much better. Cut the rear arch at the back at 45% and had to bend the 'lip' of the arch back flat (to save cutting it and leaving sharp edges) don't catch at all now, and don't look odd. I'll try and stick a before and after pictures up when I get home if you like?
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Yeah I cut the arches on me other disco but that were 3 door so piece of ****. Use me lead dressing tools to shape and fold it. This ones 5 door and I wanna avoid cutting the doors if possible.
Freediscoranger
Active Member
- Posts
- 744
- Location
- Cirencester/ west shropshire
Ah okay, I didnt cut mine that far purely for that reason.
