air con compressor clutch plate

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
i have removed the plate, there was no washer behind the nut, but there was a washer behind the plate so i removed that. what is a shim because as far as i could see there
was nothing else behind there.
it worked when i put it back together but i wont know for sure if it has cured it till tomorrow.
 
Last edited:
I am going to throw something else into the mix..... I seem to remember reading that there is a known problem with the wiring loom leading to voltage drop at the clutch. I do believe that there is a Land Rover auxillary loom available that cures this by re - routing power via an auxillary relay. Might be worth investigating ?
 
Monty...connect the two wires together that are not connected to the thermal cut out.

As Rewmer says..there was a modification as some cars did suffer from voltage drop to the clutch coil. Basically, it involves using the positive feed to the clutch to trigger a relay, with normally open contacts which has a separate fused supply feeding one side of the contacts and the clutch coil positive going to the other side of the contacts.
I have found though that the over temp. cut out on especially V8's do play up frequently. As previously posted, they are almost impossible to get...........unless someone knows different!!!!!
:behindsofa:
 
You must log in or register to reply here.

Similar threads

Flossie
P38A Eas issues
2
Replies
22
Views
2K
Datatek
Datatek
W
Air Con Not Working.
Replies
5
Views
1K
Datatek
Datatek
pete12345
P38A Air con compressor
2
Replies
25
Views
2K
pete12345
pete12345
rover75lover
L322 air suspension valve
Replies
0
Views
892
rover75lover
rover75lover
D
What IS this noise ?
Replies
12
Views
3K
dogdog1
D
Back
Top