Aaron's 90 rebuild (round 3)

aaronmorris · Jun 19, 2016

Well the engine is done, gearbox cleaned up and bolted back on, just got to get the bugger back in now

raywin · Jun 19, 2016

Arron I know it's been said before but there is a potential business here I am sure many people would be happy to pay to have their engine restored to this condition bet they would drive it round with the bonnet removed so people could see it.

aaronmorris · Jun 19, 2016

So.. the engine went in shortly after posting and I had had my dinner, and then I've been moving all my shit'e and digging the rest of the day until it ****ed it down, so I came inside.
Fitted the rocker cover once it had dried a little more, I'm a big pansy really

So now the engine is all done, dusted and in, does anyone have any advice or recommendations on a good running in oil?

Got to sort the transfer box next, but need to order a few seals, and flanges etc.. for that, but that might be a couple of weeks yet, we'll have to see how the garden project's go..

And in the meantime, I need to source all new hoses..

aaronmorris · Jun 19, 2016

raywin said:
Arron I know it's been said before but there is a potential business here I am sure many people would be happy to pay to have their engine restored to this condition bet they would drive it round with the bonnet removed so people could see it.

Thankyou for the kind comments Ray, it is nice to hear

Maybe, and hopefully one day, I just keep plodding with what I'm doing at the mo.

James_mac · Jun 19, 2016

looking great mate, you'll have it up and running in a few weeks, i think you needs to do a 110 next or a series

Jam1 · Jun 20, 2016

aaronmorris said:
Thankyou for the kind comments Ray, it is nice to hear
Maybe, and hopefully one day, I just keep plodding with what I'm doing at the mo.

He's right you know. You aren't afraid of the graft and dirty bits a lot of people don't like doing and I really think people would be more than happy to pay you to clean up and rejuvenate their engines inside and out!
A cheap (relatively) unit where you can make noise and all your pictures collected into a portfolio and I seriously think you'd end up having to turn work down.
Rocker cover looks sweet by the way

Brown · Jun 20, 2016

It's looking fantastic. But everybody's said that already. Good to see you managed to get a lot of the ancillaries on the engine before fitting it. Saves reaching down the sides and fiddling when it is in situ.

aaronmorris · Jun 28, 2016

James_mac said:
looking great mate, you'll have it up and running in a few weeks, i think you needs to do a 110 next or a series

Cheers James

Hopefully so, theirs also a few projects I'd like to do in the future

I'd love to restore a Series 1, a 130 dcpu would be nice too, oh and a 6x6

just because really

I stick to 90's because they fit where I have to work pretty well

Jam1 said:
He's right you know. You aren't afraid of the graft and dirty bits a lot of people don't like doing and I really think people would be more than happy to pay you to clean up and rejuvenate their engines inside and out!
A cheap (relatively) unit where you can make noise and all your pictures collected into a portfolio and I seriously think you'd end up having to turn work down.
Rocker cover looks sweet by the way

Cheers mate

You may be right, but the relatively cheap unit is the hard part, I have been looking on and off for the best part of 2 years and everything I seem to see locally seems to be humongous 1000s of sq-ft warehouses or silly expensive rental

If they wasn't so much, I would have one for my own projects, and look at it that anything over and above would be a bonus.

Brown said:
It's looking fantastic. But everybody's said that already. Good to see you managed to get a lot of the ancillaries on the engine before fitting it. Saves reaching down the sides and fiddling when it is in situ.

Cheers Brown

yes, much easier while it was on the floor, still got a couple of bits to do, but the bulk of it is done, might as well make life easier if you can is my thinking..

Al2O3 · Jun 28, 2016

I thought of another business idea for you, Aaron! Get some of those pictures made in to posters or HD Desktop backgrounds

It looks awesome!

mick the builder · Jun 28, 2016

I've run out of superlatives.

Bennehboy · Jun 29, 2016

Looking mint as usual Aaron.

adrian82 · Jun 29, 2016

Hi Aaron what paint and primer did you use for the engine also cracking build

aaronmorris · Jul 21, 2016

Good morning chaps and chapesses, about time I updated this thread, had a 4 day weekend one before last, to A) Get the garden finished, cleaned up and filled an 8T skip. And B) Get something done on the LR.
Well it worked roughly how I wanted and managed the get the front end on finally, and it's good not to have to have a tarp thrown over the engine etc..
Set a temporary cover up as we had showers on and off all day/weekend and I didn't want to be interrupted by the weather

Original inner wings, galvanised and re-fitted to wings.

Bonnet on, tarp down and that was about it for the weekend.

Other than quickly bolting the bumper on, well in a round about fashion as the holes wasn't drilled out big enough in the chassis on one side.

So the body is now fully bolted down after months of being held together with half a dozen loose ones and finally feel like I'm getting somewhere now.

Have done a little more since, but pictures are still on the camera, so will upload them when I get a mo and do another update

Paul D · Jul 21, 2016

Very nice mate.

Al2O3 · Jul 21, 2016

Looks awesome, son! If I ever did another it would be in that colour and probably a rag top.

raywin · Jul 21, 2016

Al2O3 said:
Looks awesome, son! If I ever did another it would be in that colour and probably a rag top.

I agree bit like the Heritage but somehow more authentic.

micknkatenki · Jul 21, 2016

What a fantastic job your doing and have done, and in those conditions. I moan about not having a nice workshop to work in and then people do this which is the same as I have got. (a drive way and a tarp)

well done.

Karls · Jul 21, 2016

Fantastic work my man. Seriously impressive stuff!

Disco1BFG · Jul 21, 2016

WOW !! - truly amazing work - a "professional" restorer would charge crazy money for that standard of finish, attention to detail and I hope you're very proud of the result.

markSX · Jul 21, 2016

I think you know I'm a fan of your work Arron, but I must say you seem to be able to outdo yourself on every project.

You have patience, determination and bloodymindedness to do the job, and the skill to do it right.

You sir, should be very very proud of yourself.

Aaron's 90 rebuild (round 3)

Head's a shed

Well-Known Member

Head's a shed

Head's a shed

Active Member

Well-Known Member

Well-Known Member

Head's a shed

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Head's a shed

Old, nackered 'n broke, but the Landy is fine . :)

Well-Known Member

Well-Known Member

Active Member

Active Member

Well-Known Member

Active Member

Similar threads