123-eddy09
Active Member
- Posts
- 229
I decided to change the oil in the gearbox on my defender. Draining was no problem then i came to deciding how to fill it up. This is what i came up with. Get a 5 litre plastic bottle wih a lid, alos get a 1.5m ish length of 10mm bore or there abouts plastic pipe. Drill a hole in the lid of the container so the pipe will only just go through. The glue the pipe in, for this i used evo stick impact stuff. Then put the required amount of oil into the bottle put the lid on, pplace the other end of the pipe into the filler hole and turn the bottle so the lid is at the bottom. The oil will then flow into the gearbox, it will be slow but it gives you time to change diff oils and the like. Also punch a hole into the top of the bottle so a vacuum isn't formed. Heres a couple of pictures.