6x6 110

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
i was thinking stretch the chassis while fitting 3rd axle,but i could do with some diamensions,i have some rough measurements after scaling from pictures based on wheel size
 
stretching a chassis is an enormous job really not worth it when you can just buy a 130 with an extra 20 inches already.
 
at the back! ye you need to check individual axle load bearing capacity and before you add another have a look at different axles. i wouldnt put the crane BEHIND the axle though.
 
Hi, I build a custom flatbed with hiab I ton lift on the back, it was a hicap easy to remove the back scetion, it carrys a ton anywhere, I builded custom trucks as part on my job in my workshops. the 110 as the biggests spring you can buy. we use it on the beach, on the farm, You can not carry much more than that, if you go over 3.5 tons you need a tacho on the road, the 110 with the crane is 2.5 tons so a ton is all you can carry anyway & a 130 is a big Landrover to turn in small space and work with. if you put to big a crane on there is no load carrying left.
 
Scillywelder said:
It`s works for me 7 days a week ,lifting all my welder/gensets, marine engines for boats on the beach, farm machines just about the lot, it will lift and carry a bag of logs & tow a 2.5 ton trailer full in mud.
Click to expand...
same type of work mate ,id like to fit a bit bigger crane though even if i sacrifice payload or fit tacho
 
You must log in or register to reply here.

Similar threads

G
Which head Gasket to buy
Replies
4
Views
151
discool
discool
Tjay
For Sale/Wanted Rear Defender Axle
2
Replies
24
Views
609
Tjay
Tjay
R
Loud fuel pump
Replies
9
Views
329
lynall
L
ovalandrover
6x6 110
Replies
1
Views
1K
Wolf Pack
W
D
permanent live in engine bay for spotlights
Replies
10
Views
342
lynall
L
Back
Top