2010 Freelander 2 eco start/stop fault on TD4 (not TD4e)

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
T

Tigercallie

New Member
Posts
6
Location
Sheffield
Hi everyone,

Apologies in advance if this is a stupid question. I just bought a 2010 Freelander 2 TD4 and it has an "eco" button on the dash. This lights up when I start the car, but then goes off, if I press it I get a message saying "eco stop/start fault". I'm confused for two reasons really. Firstly I thought eco stop/start was only in TD4e models, and so didn't think mine even had it...but then why does it have a button on the dash lighting up for it?

Thanks a lot, appreciate any words of wisdom!
 
Is it a manual or auto? I assume if it’s flagging an error message when pressed the car is expecting it to be fitted

Need to get a proper diagnostic carried out on it
 
Look at the VIN of the car (under wiper on passenger side) if there is an ‘A’ or later before the ‘H’ just before the 6 numbers at the end of the VIN you’ll have stop/start fitted.
 
td4van said:
Look at the VIN of the car (under wiper on passenger side) if there is an ‘A’ or later before the ‘H’ just before the 6 numbers at the end of the VIN you’ll have stop/start fitted.
Click to expand...
Thank you, I've got the VIN, I'm not 100% sure I understand you correctly. There are A's in position 2 and 5 in the chain, and an H before the line of six numbers

Thanks a lot for your reply
 
Ignore this post. I answered a question in the wrong thread, but put it here. :(
 
Last edited:
Thank you for explaining this. So which A am I looking for to see if stop/start is fitted? I'm not sure if there's a word missing in td4van's reply. Thanks for your help
 
Ok so you should have stop/start as that’s a 2011MY

You’re only option is to get it booked in for a diagnostic session to be carried out including checking the battery spec and condition, fault codes and live data
 
td4van said:
Ok so you should have stop/start as that’s a 2011MY

You’re only option is to get it booked in for a diagnostic session to be carried out including checking the battery spec and condition, fault codes and live data
Click to expand...


Further confusion it's a 2010, is that what you mean?
 
No - it’s a 2011 model year - model years are used by car manufacturers to introduce new features and changes etc and are generally brought out the year before hence why yours is a 10 plate (registration year) but a 2011 Model Year

Advise still stays the same - proper diagnostic session to determine what’s going on
 
You must log in or register to reply here.

Similar threads

W
Freelander 2 2008 starting issue
Replies
12
Views
554
Arctic2
Arctic2
K
Freelander 2 (LR2) Car Starts after second push
Replies
2
Views
649
kobs
K
R
Freelander 1 Non start
Replies
9
Views
1K
Freddie17
Freddie17
P
Freelander not starting at all??
Replies
10
Views
2K
BikerB
BikerB
Deni75
Freelander 2 (LR2) Freelander 2 it doesn't start
Replies
6
Views
1K
Jocelyn
J
Back
Top