Coffeelandy
Well-Known Member
- Posts
- 2,297
- Location
- SE Cornwall (forgotten part!)
Please tell me didn't spend that much on a 10 quid thermocouple???
200 TDI Boost Ring
- Thread starter sp00k
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Coffeelandy
Well-Known Member
- Posts
- 2,297
- Location
- SE Cornwall (forgotten part!)
Came as a package. It's either poor connections of its busted. I tried heating it with a blow torch bit still no reading .
To make matters worse I snapped a bolt off in the manifold removing it!!!!
- Posts
- 83,279
- Location
- Embasinga stocæ
contact the supplier?
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
- Posts
- 83,279
- Location
- Embasinga stocæ
narr - £15 on the complete system
Coffeelandy
Well-Known Member
- Posts
- 2,297
- Location
- SE Cornwall (forgotten part!)
Yeah just did so let's see. The whole lot was only 30 quid so no drama but peed off about the snapped bolt!!!!
Coffeelandy
Well-Known Member
- Posts
- 2,297
- Location
- SE Cornwall (forgotten part!)
Yeah it's very simple can't fathom it though maybe it's knackered.
- Posts
- 83,279
- Location
- Embasinga stocæ
Coffeelandy
Well-Known Member
- Posts
- 2,297
- Location
- SE Cornwall (forgotten part!)
Yep looks like the 25 quid bit will be unleashed again.
battenberg
Well-Known Member
- Posts
- 2,101
- Location
- Birmingham UK
yes thanks, it rained so hard there there was this old white bloke knocking up a wooden ark and bringing animals towards it
Coffeelandy
Well-Known Member
- Posts
- 2,297
- Location
- SE Cornwall (forgotten part!)
Supplier suggests a volt meter at the gauge end of the thermo to see what it's reading. Trouble is I don't have a volt meter. I do now have a brand new tap and die set though!!!
- Posts
- 83,279
- Location
- Embasinga stocæ
Cheap multimeter from Maplin - £5
Ian Maycock
Well-Known Member
- Posts
- 474
- Location
- Stafford
You'll need a bigger garage soon Coffeelandy with all these new tools you keep buying . I brought one of those cheap made in China ones was useless so brought a stack one and that's been spot on , everything you need is in the box .
Coffeelandy
Well-Known Member
- Posts
- 2,297
- Location
- SE Cornwall (forgotten part!)
I got one from Screwfix for 30 quid. Good reviews mostly saying go very slowly and use oil and it works well!
Coffeelandy
Well-Known Member
- Posts
- 2,297
- Location
- SE Cornwall (forgotten part!)
Sorted it. The fecking instructions told me to wire it up the wrong way around! Really helpful supplier though I must say, very attentive with advice. Anyway now I can put the boost ring in and report the findings.
Last edited:
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Coffeelandy
Well-Known Member
- Posts
- 2,297
- Location
- SE Cornwall (forgotten part!)
I wired it as they told me dammit Man!!!
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Coffeelandy
Well-Known Member
- Posts
- 2,297
- Location
- SE Cornwall (forgotten part!)
Erm English but via China I reckon. They had the word greed instead of green for the wiring plan!
- Posts
- 83,279
- Location
- Embasinga stocæ
Reet... thought I would give it a try today... my pump looks a bit different to all the pics - it has a black plastic item attached to the top of the pump. But more importantly, I cant seem to remove the old pin and diaphragm. The guide pin seems to be fouling the bottom of the boost pin, such that it doesn't want to release. I don't want to try brute force, so is there a knack to this?
