1985 300tdi

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Rage. It's not failed because it hasn't been yet. The bloody handbrake cable hasn't arrived so I can't fit the fooker.
 
Onefive said:
What do you mean how was it done???
I can take pics tomorrow if needed.
Click to expand...

Onefive said:
1895 (c) 300tdi conversion with r380 gear box and transfer box
Click to expand...

i'm presuming it was a disco conversion over a defender.

with a disco there seems to be multiple ways of doing it and where things end up. ie, did they make up new mounts, use a bracket around the oil filter etc. is it 300 defender style, with 300tdi rear prop or is it back against the bulkhead.

i'm going to start converting mine, so i'm just looking for ideas on the best way without costing the earth :)
 
Never heard of using a 300tdi prop.!?
Mines done properly with a full 300 tdi donor. And a r380 gearbox so the engine is sitting in the middle of the engine bay. Not bodged in and right up to the bulkhead. And 300tdi engine mounts welded in.
 
Onefive said:
Never heard of using a 300tdi prop.!?
Mines done properly with a full 300 tdi donor. And a r380 gearbox so the engine is sitting in the middle of the engine bay. Not bodged in and right up to the bulkhead. And 300tdi engine mounts welded in.
Click to expand...


ah, just noticed yours is a 90, mines a 110.. probably why i mentioned the prop as i think the current lt77 one is 40mm too short for the r380

are your gear sticks are in the correct position?

did you do the conversion btw?
 
Last edited:
trax said:
and your gear sticks are in the correct position?

did you do the conversion btw?
Click to expand...

Yes my sticks are in the right position. But remember you'll need a r380 tunnel housing or 300tdi defender one in the cab.
Then you've got your exhaust to think about 300tdi defender exhaust but then get the welder out as youll have to make new exhaust hangers.
Steve parker does the bits.
I never did my conversion but I've done two 200tdi conversions on other defenders a few years back.
 
Onefive said:
Yes my sticks are in the right position. But remember you'll need a r380 tunnel housing or 300tdi defender one in the cab.
Then you've got your exhaust to think about 300tdi defender exhaust but then get the welder out as youll have to make new exhaust hangers.
Steve parker does the bits.
I never did my conversion but I've done two 200tdi conversions on other defenders a few years back.
Click to expand...

rightio. i think you can use a kit from ashcroft for converting the disco to defender long stick and i can reuse the lt77 top to get the sticks in the right place.

cheers, i think i need a bit more research.

sorry for the thread hijack:D
 
After being away on holiday my defender finally got round to a MOT today. Passed with no advisories.
Offers!
 
Wow, I've just read this entire thread and you've certainly been through the mill with all of the comments on here.

Looks to be a good truck IMO.
 
trax said:
rightio. i think you can use a kit from ashcroft for converting the disco to defender long stick and i can reuse the lt77 top to get the sticks in the right place.

cheers, i think i need a bit more research.

sorry for the thread hijack:D
Click to expand...

you'll need a selector rail adapter and yolk :D
 
all he wants to do is sell hes 4x4 to get a car for work.know youve got an mot you should get 3k for it all day long.good luck mate
 
You must log in or register to reply here.

Similar threads

L
SOLD - Land Rover Ninety (Defender 90) 300TDi Auto soft-top
Replies
9
Views
4K
mondifa
M
W
300tdi Station Wagon
Replies
3
Views
2K
WillP
W
Coupebrett
very capable 300tdi discovery
Replies
5
Views
7K
Coupebrett
Coupebrett
Back
Top