New profile posts

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Hello mate, thanks for your message. It's probably older than I was aiming for (I've got to keep the wife happy too this time) but can you send me some recent pics please? How does being converted from a van affect the insurance?

Regards, Darren
Hi everyone, I’ve got a 2013 L494 Range Rover Sport, back right door not locking and window not working. Replaced door module and door actuator/latch still nothing, it’s like no power check all fuses all ok.????
Any help would be greatly appreciated
Thanks in advance Nick.
Hi Ric. A while back you posted a thread about your temperature sensor (really helpful). Can you let me know how you checked the resistance please as I would like to do the same. i.e. where you put the wires from the multimeter and at what times during the running of the engine. The youtube clips I have watched suggest one shouldn't check resistance when there is a current flowing.
Many thanks for your help
James
You would do better to ask these questions in the open forum in the relevant section you would get more answers/advice.
These posts are on your profile.
P
psk100
Thanks still getting used to the forum a little
As a query how difficult is it to replace engine to gearbox seal as it appears I have leaks around the engine sump and gearbox to engine grrr and as I have it jacked up on stands I really ought to do them as well
The only thing I am replacing that was not at all planned is the front cross member as it turned out to be rotten and cant believe the previous owners mechanic didn't notice or comment about this and nothing on previous MOT's either. So fortunately found one and just have the great joy of fitting it!
Just as an update a week on and upgrades still ongoing wheels just picked up for a colour change and repairs. I will be posting some photos of everything that’s been happening over the weekend as think I deserve a weekend off if I can stay away!
The jury is still out as to whether I'm lucky or not... but I've got rid of the three amigos, and now I'm dealing with the srs light unable to communicate with it. HELP!!!
Hi
I am new to this site.
I am living in Rwanda and have a 1999 P38 Diesel which I use on a daily basis.
I have the, seemingly common, problem of trouble starting when the engine is hot.
I was wondering if anyone can help to let me know where I can buy the timer relay kit that people have mentioned to fix this problem.
RangeRoller dt
RangeRoller dt
The timer relay (hotstart kit) is required for earlier models only. an MY 1999 won’t need it.
Presuming air is not entering the system, What you are likely suffering from is chain stretch/worn fip. Look at ‘static timing’ in RAVE. You could possibly get away with giving the fip a slight tap towards the engine (that’s the direction it needs adjusting to)
N
neil kirkup5
Trouble with my Yellow Relay PCR 4427 situated by the fuse box in the engine engine bay, engine will not start?
I am also adding waterless coolant and had it up to Gareth at Empire tuning before I started he had a drive and said its fast already and some sort of mapping and maybe switchable so once I am finished with my works few hours with Gareth and lets see what it tests at so I can let my insurer know!

Then I will have to think of the next thing maybe something with Ashcroft to upgrade the gearbox I think.
Continuing upgrades to my 2003 TD5 Some parts on back order or under the dining room table. The list is so far new brakes, braided brake lines, upgraded pads and discs to terrafirma, new hubs, callipers and hub carriers. An upgraded VGT from Allisport along with upgraded intercooler, new radiator and upgraded electric fan, all new silicone cooling / water and turbo pipes. and a Ceramic coated exhaust manifold.
TDI 200 Steering Wheel nut torque setting.

Hello, can anyone tell me the torque setting for the steering wheel nut please? I think it's 35nm, does that sound right? Thanks, in advance..
miktdish
miktdish
Is there one ?
Just tighten it so there is no movement...
Lephreek
Lephreek
Ah I see, thank you.
Hi I'm John retired and living in the North East of England. I own a classic Range Rover under restoration a 1996 P38 v8 and have just bought a 2003 Discovery 2 Metropolice v8/Lpg. My son(ex land rover mechanic and auto electrician) helps keep them on the road and runs a 2008 Disco 3 tdv6. We have also owned three other Range Rovers and a disco 1v8/Lpg. What started all this was my first 3 door v8 R. Rover in the 80'
Hi I am restoring a 1970 LWB series 2A diesel. I am missing the 3 bolts for the starter motor. Does anyone know which bolts I should buy?
Back
Top