Search results

Well it's a broken wire. Not sure where I've cut the wire below the join to see it it still blows so it between the fuse box and the stereos about 3 foot of cable so I'm going to cut the cable as it comes out the fuse board and solder a new length of cable in. Looking at the wiring diagram the...

That Did not last long lol The centre console is back out and I can not see anything that's shorting it out. It's got to be something small a wire rubbed on something somewhere but now it's going to be a very slow process.........

Not sure if I've fixed it completely but it's working. Having had another digging about behind the dash these a wire that's been joined in past (not by me) that's been taped up. The joint was good but taping was not good. Can not see if or where it was shorting out but it's working and not...

Had it back in bits again today and tracked the fault down to wiring behind stereo/heater area. Not found the wiring at fault but had a route around and can put fuse in without it popping it but as soon as you move wiring about it pops the fuse. I can connect it all together listen to stereo but...

Tried a bigger fuse 30 amp instantly popped. Not tried multi meter yet as I can't find it lol

Multi changer is on fuse 9. That cycles ok if you take out fuse 9 and put it back in. That fuse is fine!!!

Things that still work with fuse 11 blown Cig lighter Rear power socket Interior lights Heater Central locking Everything other than stereo and can not change time on clock(clock works it's just wrong time) Which means there is a switched power supply to clock.

I've tried putting a fuses in when everything is disconnected stereo, steering wheel controls and even clock but it pops fuses with nothing connected. Is there anything else that's on that fuse because everything seems to work. I've checked wiring best I can and can not see a break or damage and...

problem with stereo fuses blowing constantly now. It's fuses 11 that keeps popping as soon as you put it in. It's beginning to do my head in. At the moment I've got the steering wheel off and wiring for steering wheel controls disconnected. The stereo is out and disconnected. But the fuses...

I've got a td4 freelander 1 with standard cassette player and multi changer. The fuse in the under dash fuse board keeps blowing. What I wanting to know is there anything else in the same fuse other than the clock and stero. Can not see it being the clock and the stereo works before fuse...

Thanks

Need a bit of help. Servicing wife's freelander td4 and just checking "turbo control valve vent filter" it has one pipe going to solenoid but other end just has a inch of pipe on it that looks perished like it has split. Is this right and if not where should it go to. I've had a look stuffed my...

Having a nightmare with these locks another lock today and same problem!! So I'm wondering electric fault?? Does anybody know wiring on plug for locks?? IE what number pin is live for unlock,lock,deadlock ?? So I can check this its either that or another dud lock???? Cheers Paul

If I get time I may put back old receiver to see if fobs still work. Least then I know I can keep/sell working receiver??? Paul

Answer fitted correctly c@@p lock. Taken it back and got my money back!!

I have had fobs coded to car (previous thread) the door lock would lock with fob but not unlock and the just died completely Could not lock with fob or keys!!! I know this has been covered many times and I have read old posts. I have replaced door lock. It now locks with fob no locking again...

Well got it fitted and like has been said it still needed coding to car. Grand total £70 for two fobs and coding so not that bad really. Paul

Worth a shot for what it's cost me £35 for 2 fobs and alarm receiver if it still needs recoding I've not really lost that much. I'll let you know if it works either way just for future reference for any other member. Paul

Yeah I know but for price of 2 fobs I can get receiver as well, so I'm hoping because they all came of same car and are working its just a matter of changing over reciever and not recoding fobs.

Thank you got Haynes manual but it gives no info on where alarm bits are. Now I know where to start stripping. Cheers for all replies:D:D:D Paul