Search results

Dont get me wrong, i am not looking to be shaking windows and setting off earthquake sensors 3000 miles away with this but i would like a mild upgrade to the sound system in the discovery. the issue: i currently have a 04 TD5 with the full harmon sound system, running via the HK amp and...

Sorted.. means i dont have to cut and bodge, i will just attach a new wire in. Now the fun part will be getting the new wire(s) through the bung in the chassis.. oh joy! Quickly, is it possible to run this to pin 9 on C0506 (on the SLABS ecu itself) i should imagine it would be...

After looking through most of the threads on here (sierraferry's explaination was golden). I drive a 2002 (sept 2002 registered D2 TD5 auto) which did not come with the CDL but have fitted an early model (one CDL Switch) transfer box and it's only (apparently) got wiring for the V8 transfer...

It's 2002so middle /late and a facelift. I will have a dig and see what's there. Cheers.

I have aquired a set of D2 electric folding wing mirrors. i am of the understanding that the wiring is in (mine are heated but not leccy folding) and that on the electric folding version you push the switch down when it's in a neutral position and they will fold in/out. My question is, is...

one place to look would also be the in tank fuel pump.. mine packed up and exhibited exactly the same symptoms you described.. sounded like it was running on (for want of a better analogy) three cylinders, coughing and spluttering, white smoke, rough idle the lot.. new in tank pump sorted it.

I hav a zf autobox on my disco 2. at some point some cowboy removed the default oil cooler (and bodged the lines) they have been replaced by me and an aftermarket mocal unit has been fitted in its place. Does the ZF transmission's control unit account for oil temperature (and changing...

oops :D well when mine are on they stand for mostly-****.. which they do regularly.

they aren't snap-on or teng by any means, but any of the halfrauds Professional socket sets are good bits of kit for the home mechanic and mine (i splashed out on the £200 huge set with snappers et al) has had some proper abuse over the last 10 or so years and i only replaced the ratchet...

M is manual mode, this allows you to permanently select a gear (say second) and the autobox will hold the box in that gear until you change your selection or unselect "M", it will not change down or up from this gear at all. 1-3 are as labelled, and D is for fourth - this is only available in...

65% of the time the reversing sensors on the disco work extremely well. occasionally, however, when driving along (and not reversing or doing anything with the rear close to stuff) they will start beeping, slowly increasing in speed until you get the solid beep as if you are close to...

i had a similar situation, which only showed up when the engine was hot, it would be like it was in limp mode for 30 seconds, then it cleared up completely and returned to normal after a little driving. i changed the MAF to a delphi one (not original manufacturer but quality nonetheless) and...

gave the turbo actuator a few more turns of preload, much much much improved response,.. seems it had become, like a lot of things with old age, a little saggy and loose.. . seems the wastegate wasnt quite tight as it is now spot on, possibly even a little bit tighter giving a shred more boost.

i get this if i boot it over bumps.. occasionally, i assumed it was simply because 1 wheel was unloading and spinning and the TC was having a little panic and coming into effect.

saying that yeah i could.. is the SLS manual raise function 40 or 50mm?

just went to do some measuring.. 880mm approx from centre of the axle to the centre of the bush on the chassis, 480mm approx from the bush to the SLS height sensor. by my calculations, a 50mm lift will need a 27mm spacer, (50/880*480),

i cant see how raising the springs 2 inches would give an equal 2inches of movement in the sensors, even basic calculations suggest that if the arms are half way down the arms, 2inches of lift then the distance moved would be 50%, 1 inch..

Yeah I am getting a Dixon fab one, it doesn't come with the sls sensor adjustment, hence I was asking

i have a full set of bilstein B8s on my peugeot 306.. they are mentally good.. smooth ride when bimbling, Perfectly planted and responsive around the track. i know it's not the same car but simply look at what dakar teams are running.. the kamaz trucks i think run bilsteins.

Want to fit a 2inch spring lift kit (spacers) to aid a few of my local pay and play sites. I intend to leave the SLS intact, but a quick question before I break out the trig and calculate it. how long does the SLS sensor extension bar need to be?