Search results

Managed to put the black "antenna" lead off the Trimble into the back of the Mk.3 unit. I now have navigation, but no voice ivstructions. Will go and see my mate with the L322 to try to access the "Set" button Cheers, Tonys.

Stopover, thanks for your prompt and very informative post. The most important information for me is that the Mk.3 unit will operate with the old Mk.2 in dash controls. I have a friend with a 2002 L322, so will pay him a visit and see if I can access the "Set" button using his vehicle. When...

I have a MY 2000 Vogue P38. My existing Mk.2 Carin Sat Nav unit has been replaced with a Mk.3 from a MY 2002 L322. The system appears to be functioning, but navigation position of vehicle is a few KM out and I am unable to access the "Set" button. On start up, there is an option of a "code"...

Hi Dave, My problem was solved when my remote key opening stopped working. I replaced the latch mechanism in the drivers door and not only was my "remote locking problem" fixed, but the "headlights on" message re-appeared! Cheers, Tonys

Hi John, Forgot to mention, but both keys 1 & 2 work, as they used to do. Cheers, Tony.

Yes, I agree with you I am just trying to keep the car as original as possible and was hoping to get the CD unit replaced or repaired. Thanks for getting back to me. Cheers, Tony.

The drivers doorlock "actuator" which opens and closes the door and also controls the door locking operations of the other doors and tailgate. More information on other posts here - Australian Land Rover Owners Regards, Tony.

Can you advise me how to contact this guy. The link you used has long since expired. Regards, Tony.

Problem fixed! I replaced the drivers door latch, which allowed key to "synch" and I recovered my remote locking.

There is no LED flash when turning the key fob to start the engine. I disconected, waited 5 mins. then reconnected four times - no luck in clearing the fault. Do you think the RF Receiver is the problem?:confused: Cheers, Tony.

Many thanks Datatek!! Will give it a try.:D Cheers, Tony.

Hi Guys! Any ideads on this? The fuel pump was replaced on my MY 2000 P38. Naturally the battery was disconneced during this. On re-connection of the battery my two key fobs will not operate the remote locking. Both fobs are in top condition and I replaced the barreries in one just a month ago...

I am not a mechanic, but do get fairly involved in fixing my beloved P38. I had two driver packs replaced, when they were not really the problem. After replacement, I still had the "rising to Wade Height" and then the "Christmas Tree Lights" coming on which necessitated resetting with the RWS...

Hi Kev, Mine is on its side next to the spare wheel. I did not install it, but was in the car when I bought it.

Can't find anything with the search feature, but was wondering if anyone could "shed some light" (sorry for the pun), on my small problem. When turning off the engine with the headlights on, removing the ignition key and opening the door (and shutting it) - no "beep" and warning of the...

Great article, probably of not much use to most P38A drivers, but very factual and accurate. A lot of time and experience was put into this post and I think we should acknowledge this imput. Compared to some of the "childish" and inane posts we sometimes get this is a "breath of fresh air"! Tonys

Hi Marmite, Totally agree! I purchased the cable from Storey and bought the USB / Serial cable adaptor locally. I have had no problems in using the free software and as you say, we should support Storey Wilson in any way we can and if this means purchasing the genuine product for $30 - great...

Thanks Wills, Have loosend off the Nyloc nuts and it is quieter. I think I will replace the rubber mounts, I am sure this will help even more? It does not run all that often, mainly first trip in the day. Interesting enough, the compresser will cut out quite often as I release the foot brake...

TWEETS, Thank you for that, sounds logical? If that is the case, I will not worry so much when the compressor keeps on pumping! Regards, Tonys

Hi Wills, You are indeed a valuable forum member, your advice has been invaluble to a novice such as I! Just a few more "simple" questions: I have just replaced my "drive pack", which (thanks to advice from the forum), seems to have fixed my "fault" problem. I (for the first time, I think)...