Search results

Hi, Have been search on google for a while but can’t find them anywhere, can someone with a puma 110 please measure the position of the luggage tie down hooks in the rear. (I’m trying to fit a puma dog guard to a 300tdi 110, but don’t have the holes in the boot to attached the bottom bracket...

Hi, Does anyone in the West Sussex area have a 300tdi oil theromostat housing they wouldn’t mind selling me, managed to snap mine in two replacing the o-ring. Part num - ERR2241 Thanks,

Still available?

Work is a 4 letter word but the working week is 5 days... that doesn't add up :(

Did these come as standard then? Or could be purchased separately? I find the hand brake works well until the cable snaps and it rolls into a fence... (always park in gear)

So you could chill with the hippo's more often?

Think he wants us to crowd fund him enough for a lovely tratter

New seals? Or original ones that came of the car before paint?? Pictures?

No Idea on the length but I normally get a couple bits of string, to work out a length (laying in the mud) then go inside and make it in the warmth.

Black copper is a sign of salt corrosion most possibly caused from the salt and dark flicking up from the road. Go to vehicle wiring products website and order some new rolls as they supply any colour or wiring so you can match the pattern as it should be. (Cheaper to make your own loom than...

Look here eBay link Taken from here - https://www.landyzone.co.uk/land-rover/seat-box-lid-tape.310623/

To skin a door... Grind around the edge of the door sides) just enough so you can just see the two parts of skin (wrapped bit & door) and a small black line appearing(the frame) Pull the skin away from the frame (it might be gluded so a small flat chisel is useful). To replace the skin To...

Busy day sorting out some rust I spotted a few months back when putting a new tank in. Cut out the rust, welded in new sections, grinded, body filled to a beautiful and discrete finish, painted and undersealed, now just need to wax oil the inside as the chassis is now solid. But it took nearly...

Not a defender but my brother happened to have his m3 (BMW) written off they offered about £4,000 less than current market value, took a couple of months but after he told them to find one for the money they offered and they couldn't, they ended up paying the full amount,

I'd avoid using an old, fire extinguisher due to needed a fill, return and drain on a tank. These are cheap enough to pick up these days (£30+depending on size)

(29/64) or 11.8mm drill needed for 1/4 BSP tap, says my Zeus book See here - http://www.newmantools.com/taps/bsp.htm Second table down

Interesting that the DVLA database comes back different on the colours G344 - Lr 90 Sw 2.5 9 Owners Listed as Green 1 colour change J593 - 90 defender turbo 2.5 7 owners Listed as Grey 1 colour change

An Outer seat frame will just fit in the middle spacing, In all honesty unless you are very friendly with the person who's in the middle seat a those gear chages are very intimate, I would avoid fitting one.

Actuators & bearing runners ordered, Will post an update later next week with some pic's if it all goes well once the bits turn up.

Beautiful, Time to order some bits up, Thanks