Search results

Cheers Dom for the info and the link. Mick

Hi all sorry to pester again. The front swivel bearing had collapsed on the series 3 landy due to no oil in there for a long time. the half shaft UJ was also very loose so I ordered a new one part number RTC3346 but its too big, the cross is larger and the bearings are deeper does anyone know...

cheers guys sorted now there had been a scotch connector fitted which had weakened the wire. I have been replacing the foot wells so my moving about had snapped it. through crimp sorted it. Mick

great thanks for that as long as i know there's no relay i can sort it. mick

Hi all Looking for some help my rearfog light is getting no power the switch is in the centre console thingy, this is also getting no power. I can see a cable on the headlight/flasher stalk the same colour. The only drawing I can find shows a relay but I cant find it is there a relay? where is...

while your driving for a living you don't come up north do you?

cheers guys on with the next task then. Mick

Hi all I have an 1981 series 3 and I cant find a hazard warning light switch, there seems to be a relay in the centre part of the dash but no obvious switch. would this year landy have them, will itpass its test without them? Mick

Hmm thanks for the heads up £60 with postage phew they are certainly trying it on. On the upside I notice this doesn't have a stop in it that looks easier to make. Mick

the cabs are made to fit a 109 the bulkhead is forward on an 88inch so there a gap between the cab and bulkhead. This is my plan but thought I would try and find the real deal. Mick

yea saw them what a rip off and they look to have sold loads. Mick

yea probably easy to copy if I could get a drawing or one to copy mick

Hi all I am fitting a truck cab to my 88" unfortunately I didn't get the filler plate with the cab. I know I can get one off ebay but £100 is a bit steep, has anyone done anything different to fill this gap? Mick

Hi all I am looking for a truck cab SWB filler plate 346325 anyone got one hanging about Thanks Mick

Hi all did a search but couldn't find the answer. I have a series 3 88 inch with long wheel base wheels I think they are 5.5 wide there ar a set of td5 wheels local ata good price are they wider than my wheels so I have more choice of tyre? Unfortunately they are still tube type wheels so no...

Well apparently it's a a vacuum failure sensor struggling to find one though. Mick

Hi all I am just fitting new footwells to the series 3 when removing the brake pedal box I broke a switch on the servo its not the brake light switch that goes on top of the ergo this one is underneath the servo any ideas? Mick

Are you having any other problems? If the engine earth is bad it can earth out through the handbrake cable, just a thought. Mick

Well at the moment it will be open backed so prob remove them. Cheers mick

Ha I see should they be riveted to the top of the tub? Mick