Search results

That's usually a symptom of an earthing problem.

Hi Gary, it's probably worth knowing that the lock in the back door only operates the window anyway. You can't actually unlock the vehicle with it.

Surely it's their problem if they fitted them incorrectly in the first place. You've paid them to do a job - insist that they do it properly.

It was -6ºC here this morning. At that temperature the car's headlights take a few seconds to come on but that about all that is sluggish with mine. I what way is the car being sluggish?

This might be of use to you: Freelander - SQUEAL FROM FRONT BRAKES - Land Rover

Ahhh! You need to go to Jeep Forum • Portal • Jeep-Club UK

7.3 litres from dry Chris. Freelander - Capacities - Land Rover 6.8 litres takes me to the top mark on my dipstick for each oil change I've done.

Put my winter wheels on.

Are you sure? It's 6.8 Litres to full with a new filter.

That's handy! Thank you.

Buy a stud extractor kit?

The airbag module should be replaced at 10 years regardless of mileage according to the service schedule. Maybe that's the problem?

It is on mine too. I'm not sure that's a problem though to be honest. Our cars are roughly the same age. Fortunately for me mine is running just fine and, with the exception of the RR box, I've carried out the same mods as you as far as I can tell. The only real problem I've experienced is...

I wonder why there are no pictures of the nearside of the car?

BFO = Big F*@K Off (I think) ;)

That's all from the handbook. Hope it helps.

Note: If the vehicle does run out of fuel, a minimum of 4 litres (0.8 gallons) will be required to restart the engine. The vehicle will need to be driven 1.6-5 km (1-3 miles) in order to reset the engine management and monitoring systems.

Diesel engines Vehicles with diesel engines are equipped with a system to prevent the fuel tank from emptying completely. When the fuel reaches a minimum level, the system will activate a reduced power mode (i.e. the engine will not run properly). This will be followed by the engine stopping in...

Ditto

I thought he said it was brand new? That would make 25 seconds a benchmark wouldn't it? Edit: Just checked my result - 11.2 seconds with 10.8 Kg and a 1M bar length. Still 25 seconds is still better than the two minutes measured earlier. :D