Search results

how many you after, i have a couple of old freelanders out the back, if they are the same i can get you them.

Hi, i tried to start my FL1 today and had the same problem, mine has been fine until tonight, tried new batteries in fob etc opened doors, set and unset alarm etc but would not turn over, turned out to be the wire on the starter motor solenoid had badly corroded. fitted new connector all working...

Just to update, fault was the vacuum hoses. Main pipe going over and down the back of the engine block was badly perished as well as the broken braket. Job done now I have brakes again. Thanks for all the help. :)

Found the bracket holding the solenoid on has snapped, looks like its rubbed through in a few places, I am going to move the solenoid although extending the cable looks a wee bit tight, will post results once finished, thanks for help

Cheers, I will have a look tomorrow

Hi guys, I have a 2001 td4 fl1, very happy with it but it has developed a fault. When you first press the brake pedal all ok but if you press it quickly again it is solid with no brakes (no matter how many times you pump it it stays solid) drive 10 secs and same again, fine if you only press...

Hi, I have the same problem, first press ok, second press if quick is solid with no brakes, just wondered if you had resolved your issue? Cheers

i will try that next time as i have no more spare windows lol

yes there is power to the lock, locks fine with fob or key, interior light and dash light show door still open, i smashed the window as i have a spare junk fl1 so it was the quickest easiest option as i knew i would have to take the window out anyway to investigate the initail lock fault. did...

2001 1.8 petrol fl1. Hope someone can either tell me what i have done wrong or which wires to short out! This is my project shed! All doors locked and opened on the remote fine, then 1 day after not being used for a few weeks the car battery was dead, no problem i can open the drivers door with...

Just wanted to point out that if your battery goes flat you will have to break a window to get in, happened to me last week, dean

Scotland

I will be working at Chrystal petroleum, Macmerry on monday, I can leave it in their workshop for you to collect during the week if you want, it would save you a lot of driving.

If you need a rear window, I am in macmerry on monday, I think I have 1 from my scrapper fl1, let me know if you want to collect it from me. Dean

Do you need a sensor? I might have 1 from my scrapped fl1 if you want it?

Had mine checked, rear left abs is now good, but now I have a front right abs fault?.. coincidence or gremlins? Might just give up on it and break it for spares!

Will get faults "cleared" next week and let you know if it works, fingers crossed

Mine says back left sensor, new sensor fitted, new ring, wires, resistance, voltage checked, thought I would go abs ecu first as it was the cheapest option, starting to lose hope of ever turning off the 3 amigos

Hi, I have a 2000 1.8 petrol with the same fault, mine has the abs module under the drivers seat, I will be changing the abs module next week so will let you know if that cures it,