Lambda sensor plug location

martin1512

Well-Known Member

Posts

3,941

Location

Half way up a cliff in Dorset

• Apr 20, 2015

• #1

Hi all. I was hoping someone can help with a problem I have with the missus' 1.8 Freelander. I need to access the plug for the rear lambda sensor, the one after the cat. I have removed the red water/dust seal from under the vehicle, but I can't get the plug through the hole to disconnect it. It must be accessible from inside the vehicle, but I am buggered if I can find it, can anyone help please?

 

D

digi

Active Member

Posts

197

• Apr 20, 2015

• #2

Remove the black rubber gator from around the gear stick, you will then be able to see and disconnect the plug for the lambda sensor then just pull it through from under the car.

 

martin1512

Well-Known Member

Posts

3,941

Location

Half way up a cliff in Dorset

• Apr 20, 2015

• #3

Thank you. I finally found out where it is after removing almost all of the centre console :doh:

 

deangermouse

Active Member

Posts

255

Location

Newton Stewart, SW Scotland

• Apr 20, 2015

• #4

Do you need a sensor? I might have 1 from my scrapped fl1 if you want it?

 

martin1512

Well-Known Member

Posts

3,941

Location

Half way up a cliff in Dorset

• Apr 20, 2015

• #5

deangermouse said:

Do you need a sensor? I might have 1 from my scrapped fl1 if you want it?

Click to expand...

No, I just needed to remove the sensor as I was changing the exhaust and couldn't apply enough force to the spanner while the exhaust was still attached to the vehicle. thanks anyway though.