Search results

get yourself a decent tool kit you could do a lot worse than this Halfords | Halfords Advanced Professional 150 piece Socket/Ratchet Set also the front prop vibe is a well documented problem why ask a question, get an answer that is supported by a number of people and then doubt it ? it is...

because when you are accelerating you are putting torsional forces through the UJ, free wheeling they are just turning over

if you have a lift on the truck may as well get a new wide angle prop !

soon after I bought the 300 I noticed a vibration through the whole car, so I took it into a "specialist" who diagnosed gearbox problem so he had it in and said it needed a new box GULP! but on further inspection he said it was because it hadn't had a oil change in a million miles so he changed...

Ah I only ever fitted cctv to shops and industrial units

no worth a try just don't go in water lol

unless he's got signs saying "CCTV in operation" or words to that effect any footage can't be used as evidence a loop hole in the law says that it's classed as "entrapment" if there are not signs

In a word NO the "cold feed" has a diameter of 2-2.5" even if you managed to get it pointing directly forwards after all the twists and turns you would have to put in it to get it to point at the filter there would hardly be any thing coming through it. and as for being as close to the turbo as...

MMMM lovely a open filter next to a red hot turbo sucking in all that nice hot air ! Not good for performance or economy working against the intercooler. better off with either a standard filter in the standard air box or a panel filter in the standard air box as the standard box takes it's feed...

well there's a landranger on king street in Longton too ! directly opposite portmerrion factory shop 492 King Street Fenton Stoke on Trent ST4 3DJ

exactly like that :)

test your boost pressure yourself it's quite easy instructions to do it are in the Haynes manual. you just need a length of hose, a Tee piece, and a boost gauge.

What part of staffs are you on ? Paddocks is only in Matlock

stuck open you would have no boost as it would let it all go down the exhaust. stuck closed you would only really notice when you booted it, and built up full boost cause it would just keep boosting

200 is very very basic and bomb proof but like a tractor, 300 a bit more refined both are a doddle to work on and both are really easy to get bits for

true but it may only be highlighted when the prop/uj's are under load ?

check your props sounds very much like one of them needs replacing

1.8 meters 1793mm's to be exact

yes they are indeed taper roller bearings :)

nope it's just a box best thing to do is get a de-cat front pipe and throw the thing in the scrap. it'll run better and give a bit more power too