Search results

thanks James, to be clear plug the hole in the vac pump body? And any way of diagnosing if it is head gasket other than taking it off?

I am hoping perhaps it is head gasket. Can they blow to cause this issue? All well with water and oil, not mixing.

Have 200tdi which was reconned about 4 years ago. Has been fine and have noticed no drop off in performance. But a lot of oil coming through from the pipe which goes from Oil cyclone breather to air filter housing which the drips out. Have cleaned cyclone out and have changed for a new one...

Replaced both half shafts and new heavy duty driving members. 10 minutes a side. Nice easy job

Seem to get through my rear drive member flanges (1990 H Reg 110) every two year or about 5k. Are there any heavy duty ones anyone can recommend? (Mine are the less protruding type)

Lots of threads on this but cant quite get what I want! Have 1990 110 Defender, disc at front, drums at rear as standard. Original steel wheels marked up as follows: 91014 5.50Fx16x33 >1241 FV2000727 NRCC7578 Sure that means something to someone! Want to upgrade and have been told to check the J...

Thanks but too much for me

PM'd you Mike

Mine all work but are painfully slow. Might that be motor or more likely the cable thingy!

Mine are getting rusty and flaky. What has anyone got out there. Its for a farm 110 with standard 110 tyres. Some not so great alloys would do? Worcester-Midlands area preferred

Changed the standard reversing light for an LED one about 2 years ago and has been fine. Now when I have any lights on there is a faint glow from some of the LED's in the reversing light, enough to notice. When I put into reverse full brightness from it. Any suggestions other than earth as to...

Just torn mine off and made a right mess of it. So looking for a replacement wrap around, but would consider anything that I can fix two spotlights to. For a Defender 110

Researching oil leaks.....Can anyone tell me why of the manifold gasket is cracked, it leaks oil. Where from??

Have to get a vintage tractor (2 ton) from Pillerton Priors (Warks) to Worcester, about 35 miles. Have Landy so looking to borrow a car transporter trailer?

That's great, thanks Guys

Thanks for that, but still not entirely clear to me. I am concerned about the three water galley bolts. (Bottom right corner) Looks like 1x75mm, but what are the others? They are the ones which go right through

Ok can anyone please give me the definitive number and sizes of water pump bolts I need please, particularly the ones that go all the way through into the block. Better still a diagram of which goes where, and somewhere I can buy a set please!

Hi, has this gone?

Ok thanks James

Got in Landy today and the low/high gear stick is very loose and just moves easily forward and back without engaging. Feels like linkage has come loose? Any suggestions? Does anyone have an exploded view of the linkage please? Best down through the gear tunnel cover or from underneath to sort it?