Search results

No, stock have material trim. Those are re trimmed in MB Leather .

This is how we do this:

Nope, no spacers. Spring + new shock give 40mm + 205/80/16 wheels. So we got abut 55 mm lift

Don't like new cars :P

But with those i got 7 yrs of great fun and learning ;) Now wondering what choose next - Series IIA /III or Defender 90 NAS :P

Yep, really. Including bought cost of base car :)

Thanks guys :) . If somebody got some questions - feel free to ask :D

Should be on the shelf now :) Cover intro, and four pages about my two hippos :) So proud of it :):)

eeem... Probably something should be here... but no clue what :P o_O Oh, probably this should be there :D So, what we got here?, Complete refurb Pg1 (bearings, ect.) New rubber cooling system pipes, new metal fuel/cooling pipes module (that black pipes with caps) Fresh turbocharger, with...

On the front screen? Almost impossible - heating elements are between glass layers. If you got 14v on screen connectors, probably windscreen is damaged.

Hi there :) , Trying to choose a good additive for my td4. Thinking about : - MILLERS OILS DIESEL POWER ECOMAX - MILLERS OILS DIESEL INJECTOR CLEANER - LIQUI MOLY INJECTION REINIGER Most of fuel system is fresh but tank unit and HP pump/lines are the same so something should be used. Somebody...

So... we got here 140 Bhp/311,8 Nm. :)

Fitted heated front screen today :) Original loom from LR is used (pricey stuff to be honest - 150 pounds for couple of wires and 2 boxes) , just a slight mod was needed, because stock hole for windscreen loom is used by PTC harness, so I need to re-route wires to plenum camber. Then fit a...

Most of cars are not as bad as that red one. My L-series got some rust on chassis rails just under steering rods holes (on sheet overlaps) , Td4 have standard tailgate problem under number plate light, but I'll replace tailgate soon. I look under plastic sill once a year (on 5dr) and removing...

new toys for winter: Got brand new heated windscreen harness with switch - just plug and play option :D EGT is now fitted in manifold and working fine. Soon we should have some dyno results. And here we got some backstage photos from LRM session :) . You can read about both cars in one of...

Its a anti vibration damper. It is mounted only on 1.8 petrol engine cars, because the engine (and whole drive unit) is lighter than diesel, so it can go in to some sort of bad vibes.

So, after fitting new MAF (magneti marelli) instead of three other Bosch Mafs it finally works. Smoke is no more present (sometimes it make a "puff" of black one, but turbocharger is not tuned with new IC yet). Difference was instant noticeable after fitting it, but after 200 km ride ECM learn...

So, ronbox VP37 in use, full throttle, boost on peak (photo taken just before w/g opening and drop it to 19 PSI) Quite big difference. Car is a lot heavier than stock (1930kg) with all equipment and 2 people on board. Before tweaking it reach about 120-130 km/h . now it goes 160 km/h :P . But...

Some people are funny... they bought a 4wd car... they convert it to 2wd car... they use some strange (imo stupid arguments) to tell everyone that is all right... What for? there is plenty of big cars, with 2wd, cheaper in usage

This is not a freelander engine - it have some differences.