Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. Georgeblade

    Disco 1 lights and dash lights dim when indicators are on.

    Hello, I am in need of help please. My 200tdi pre facelift has developed an earth fault (I think). When I put an indicator on the dash warning lights start to dim in time with the indicators. If the lights are on then all of them start to dim with the timing of the indicators. So, removed and...
  2. Georgeblade

    Series 3 Rear door window seal

    Hello My rear door window seal has given up keeping water out so needs to be replaced. Question is - is there a specific window seal part or is it a squirt of glazing mastic? Thanks for any assistance.
  3. Georgeblade

    Series 3 Exhaust manifold to downpipe 3 hole

    Many thanks, I did wonder if its a dry/smear of sealant joint. Interestingly, the 4 hole joint does have a gasket (Diesel engine version).
  4. Georgeblade

    Series 3 Exhaust manifold to downpipe 3 hole

    Hello, I've git a 2.25 petrol with a 3 hole connection between the manifold and exhaust downpipe. Its blowing at the joint, but I can't find whether or not there is a seal available or required for this joint. Does anyone have experience of changing this type of exhaust and whether there is a...
  5. Georgeblade

    Series 3 Ignition switch on barrel with lock and choke cable

    Thanks Rob, You inspired me to take to bits and have a look. Its a very simple switch, and mine had plenty of black tarnish with some green verdigris on the contacts. So, bit of a clean with 1200 grit, put it back together - gonna try it tomorrow.
  6. Georgeblade

    Series 3 Ignition switch on barrel with lock and choke cable

    Hi, thanks for replying. Its just the switch that is held in the barrel by 2 grub screws that needs replacing - the car was cutting out randomly while driving and had become an erratic starter, which I traced back to this switch. I've since found a Bearmach part no PRC8230 that from the image...
  7. Georgeblade

    Series 3 Ignition switch on barrel with lock and choke cable

    Hello, I have a Petrol S3 with a faulty ignition switch. Its the type fitted to the ignition switch barrel integrated with steering lock. The problem is I cant find the part anywhere. The part number on the switch is 39412E and 157SA. Body width is 34mm and depth 22mm. Googling only turns up...
  8. Georgeblade

    Series 3 Replacing steering relay lower seal in-situ

    Thanks Blackburn, I'm having trouble with the retainer, as in getting it off - but I shall persevere.
  9. Georgeblade

    Series 3 Replacing steering relay lower seal in-situ

    That is my understanding too.
  10. Georgeblade

    Series 3 Replacing steering relay lower seal in-situ

    Thanks for reply, I have read elsewhere on this forum that its unlikely the thing will spring apart, however I am happy to be guided by others experience. Maybe I'll zip it back together and fill it with swivel grease for now.
  11. Georgeblade

    Series 3 Replacing steering relay lower seal in-situ

    Hello, I've had a good trawl thru the threads on steering relays but to no avail. I am having a problem getting the bottom 'collar' off of the relay that I think holds and seal and the bottom of the relay body from the elements. The 4 bolts that bolt up into the chassis came out easily, the...
  12. Georgeblade

    Series 3 Ignition and electrics dead

    No voltage in or out, wiggled the battery earth and there is 12.5v. New earth strap and terminal tomorrow. Many thanks for your help.
  13. Georgeblade

    Series 3 Ignition and electrics dead

    Yep, the battery earth strap was loose and on close inspection looks pretty poor. Got it started but new strap terminals and cleanup tomorrow. Thanks for your help.
  14. Georgeblade

    Series 3 Ignition and electrics dead

    Hello, I need a little assistance. My Petrol S3 1975 model has dead electrics. Turn the key and nothing, no ignition lights- nothing. The horn doesn't work either even tho it is effectively directly fed off of the battery. Multimeter test across battery poles gives 12.58volts. Test at...
  15. Georgeblade

    Disco 1 4WD indicator light

    Yep, its the diff lock - don't know why I said 4WD as its always 4WD. I've never seen a light on such an early Disco dash so was wondering if there is one. I've seen it light up on a Disco 1 post face-lift dash though.
  16. Georgeblade

    Disco 1 4WD indicator light

    Hi, I've got a 93 pre-facelift 200tdi and I was wondering if there is an indicator light that comes on somewhere on the dash when 4WD is engaged? Mine is the original Conran dash with Morris Marina stalks etc. Many thanks
  17. Georgeblade

    Wanted Disco 1 3 door lead area window seal

    Kevin, I sort of landed in the same place on that one. Have you any idea which Claytonrite profile would work? Many thanks.
  18. Georgeblade

    Wanted Disco 1 3 door lead area window seal

    Hello Looking for a window seal AWR5387 for 3 door disco 1 left side rear most load area side window.
Back
Top