Search results

If i have corrupted the flash memory, is it something i can reset? I was nice and gentle to start with but then in anger and frustration i started wiggling the plugs around and probably made and broke circuits whilst doing so. I had a quick look in the light of day this morning and there is some...

I haven't tried to connect to another ecu, but will give it a blast in the morning. I will also check the fuse 33, but the stand alone server powers up when the obd11 plug is connected so i figure that fuse 33 will be supplying the power. Where do i details about get the free eas software and...

Gidday, On the hunt for advice again. Every now and again my suspension faults and i have to hook up my BBS fault mate to clear the fault and then the suspension works fine for a couple of weeks. Today, my BBS failed to communicate with the vehicle communications interface, whatever the...

When the vehicle is overheating, stop pop the bonnet and get someone to switch of the engine whilst you look at the fan. If the fan stops with only a couple of revolutions then it is ok, if it spins for several seconds then it is phoned. Alternatively when the engine is hot and running grab hold...

Chances are it's the viscous fan. If the baffle is missing in the radiator then the radiator would be hot at the top and cold at the bottom so that you can check by feeling the radiator all over when temperature is up. If it is the vanes on the water pump then it would heat up very quickly and...

Gidday tried all the links to download rave for free off the internet, but not having much luck. Maybe it's because i'm using a mac. Does anybody have link to a free download of rave suitable for mac?

Found symlise on ebay and in the process of organizing some parts. temp is up today (10-12 degrees) and the suspension is working perfectly.

Do you purge the fluid, as in pump it through as you do when you bleed the brakes, or just suck it out with a syringe and refill with new stuff?

Gidday, here i am again, third time this week. This time i am trying to solve a problem with a mates p38. The brakes on the rangey need to be pumped up and the pump for the abs goes more frequently than mine. I am unsure how to ascertain whether it is the ball thing with gas in it, as i know...

My thoughts were perhaps the timing chain and tensioner guides, or maybe the fuel pump, but i was hoping it was a common fault and that someone was able to direct me straight to it. I suppose the best thing to do would be to run it up on a dyne, but i don't think we have one here in wellington...

Gidday, my 2.5 dse has had an engine noise ever since i have owned it (2 and a half years). It's a scary rattle, but i just turn up the stereo and it goes away (if only it was that simple). I have done 40k, and the noise seems to be getting a little worse, although perhaps i'm just listening...

Thanks guys, i will have a hunt on ebay and organize some bits through symlisep38

Gidday, my p38 has an intermittent fault with the eas which has been ongoing for the last couple of years. When it's cold, the suspension sometimes takes yonks to pump up and sometimes after pumping long enough goes into fault mode. When the vehicle is warm (15k's down the motorway) the...

I thought that would be the case. I imagine they would be pretty pricey and 2nd hand ones would be few and far between, especially in nz. Thanks JM for the quick response. I spotted a series pto in a local auction and was hoping.

Gidday, can anybody tell me, will a pto from a series land rover fit an early (1988) land rover 110?

Cheers

Thanks for the link station house, i followed it, but was unable to open it. I went to the web site, but couldn't navigate around there either. Are you able to copy and paste in to an email? Cheers Thanks for your input landrover 11019 i too had a problem with a blob of solder in the past...

Gidday, a couple of things, firtst of all, can anybody tell me what carb is fitted to my 1988 2.5 petrol 110. I know it is a twin choke weber, but would like to know the model code. Secondly, i have read a few posts on here where people with the same type of vehicle, ie 2.5 petrol 110 or 90...

Been following this thread, but there doesn't seem to be much happening. My Rangey has a similar noise, when it's cold and even when its warmed up, the engine seems noisey between 2250 and 2750 rpm it only does it when driving (under load) and it seems to disappear when the engine is well and...